PDA

View Full Version : Extreme Engine Digi+



Hondacity
06-02-2010, 11:42 PM
http://i24.photobucket.com/albums/c5/hondacity25/11-1.png

http://i24.photobucket.com/albums/c5/hondacity25/12-3.png



1. What is maximum stable power that the cpu power circuit provide the cpu?

say vcc= 2v...... can the power circuit provide 2 x 400A = 800w? i'm just exaggerating. still i want to know the answer. 8 pin eps connector is 300w....but if we push the drivers and fet+ i'm sure we can push over 300w from a single 8pin eps connector...

2. Can we increase the switching frequency above 1000khz? Chil is very good im not sure if their controller can support 1200khz. I forget if the ocillators on the board can support 1000khz+. but i'll just ask just in case.

3. What is total capacitance and inductance before cpu?

Hondacity

V2-V3
07-23-2010, 02:32 AM
# 1. I believe the motherboard CPU socket and power circuit is tested up to 600W i dont know if it was tested further, I suspect it can handle more power than that.

The single EPS 8 pin connector for CPU power is rated for ~400W