PDA

View Full Version : 2 x Asus GTX Titans - Waterblocks



Counteragent
07-25-2013, 12:01 AM
Greeting Guys,

Within the next few days I should receive my two new Asus GTX Titan Video Cards.

I'm currently running 2 x EVGA FTW Cards which I will be removing from the loop and possibly for the time being I will run these new cards on AIR until waterblocks arrive.

My question is what waterblocks have you guys used to cool your GTX Titans?

I was thinking of going with the HEATKILLER® GPU-X³ GTX Titan "Hole Edition" Reference Design Full Coverage Water Block.

Just after thoughts of the quality/performance of waterblocks for the Asus GTX Titan.

Cheers

HiVizMan
07-25-2013, 09:35 AM
What I have seen the XSPC Titan water blocks gave better performance than the EK versions, I have not tried those you are thinking of using.

Zebeyo
07-25-2013, 09:44 AM
If I could just afford a Titan, let alone two... And water cooling ... :P

First world gamer problems: I can only afford the third best graphics solution :D

HiVizMan
07-25-2013, 10:08 AM
Denmark is way more first world than most first world countries :D :D

Zebeyo
07-25-2013, 10:24 AM
So you suggest it's even a "top of the first world gamer problem?" :D

There's actually potential for a full thread here similar to "You know you're a ROG'er when..."

Well that's enough off topic from me - sorry :P

Arne Saknussemm
07-25-2013, 12:28 PM
I have the EK-FC Titan XXL full card blocks on my two....and I like them....cool very well and are smart and come with a backplate that also acts as a heatsink for the RAM on the back of the card.....get great performance out of the cards water cooled....

Latest OC with no votage increase over stock value... +190 on gpu clock +500 ram with no artifacting etc.

GOR52
07-26-2013, 06:41 PM
Greeting Guys,

Within the next few days I should receive my two new Asus GTX Titan Video Cards.

I'm currently running 2 x EVGA FTW Cards which I will be removing from the loop and possibly for the time being I will run these new cards on AIR until waterblocks arrive.

My question is what waterblocks have you guys used to cool your GTX Titans?

I was thinking of going with the HEATKILLER® GPU-X³ GTX Titan "Hole Edition" Reference Design Full Coverage Water Block.

Just after thoughts of the quality/performance of waterblocks for the Asus GTX Titan.

Cheers

Another 3rd world alternative:
http://www.corsair.com/en/blog/corsair-h50s-in-clash-of-the-titans
http://www.evga.com/forums/tm.aspx?high=&m=1901232&mpage=1#1904817

Dartmaul
07-26-2013, 08:35 PM
http://www.xtremerigs.net/reviews/water-cooling/nvidia-titan-water-block-roundup-coming-soon/
Looks like EK block is good if you have a powerful pump.

Arne Saknussemm
07-27-2013, 08:14 AM
Yep....as always flow is key....if you get a pair of blocks set them up with parallel flow and this will keep flow rate high.....teamed with a D5...great performance..