atiman
11-30-2011, 06:34 PM
Problems with sleep (hybrid sleep) mode on P8Z68 Deluxe.
Configuration:
Motherboard: Asus P8Z68 Deluxe, BIOS 0902
Processor: Intel Core i7-2600K
Memory: 2x4Gb Samsung 1333
Graphics Card: Asus GTX460 DirectCu Top 1Gb
HDD: Samsung HD103SJ and other
Sound: Creative Sound Blaster X-Fi Titanium
Problem: сomputer does not resume from sleep (hybrid sleep) mode.
Hibernate works fine.
Into sleep mode the system goes, but is not resuming.
Thus there is a double-start:
when press the power button the computer starts, turns off, again starts - the fans are running, HDDs spins up, USB (or PS/2) keyboard and mouse are not activated, the LED-indicator of the motherboard displayed Q-Code EA, which means "S3 Resume Boot Script Error", sometimes E1 - "S3 Boot Script Execution".
That's all.
If then turn the computer off by holding the power button for several seconds and then turn on, the system boots (restored) normally, as in hibernate mode (if use hybrid sleep mode).
Reset (clear CMOS) BIOS does not help. On the BIOS version 0706 was the same.
Memory tried another - the same effect.
"Internal PLL Overvoltage" value has no effect.
ME firmware 7.1.20.1119 now.
Such a combination of versions of ME firmware and BIOS
7.1.10.1065 and 0706, 7.1.10.1065 and 0902, 7.1.20.1119 and 0902
give the same result for sleep (hybrid sleep) mode.
Could you tell me how to make a working sleep (hybrid sleep) mode?
Thank you!
Configuration:
Motherboard: Asus P8Z68 Deluxe, BIOS 0902
Processor: Intel Core i7-2600K
Memory: 2x4Gb Samsung 1333
Graphics Card: Asus GTX460 DirectCu Top 1Gb
HDD: Samsung HD103SJ and other
Sound: Creative Sound Blaster X-Fi Titanium
Problem: сomputer does not resume from sleep (hybrid sleep) mode.
Hibernate works fine.
Into sleep mode the system goes, but is not resuming.
Thus there is a double-start:
when press the power button the computer starts, turns off, again starts - the fans are running, HDDs spins up, USB (or PS/2) keyboard and mouse are not activated, the LED-indicator of the motherboard displayed Q-Code EA, which means "S3 Resume Boot Script Error", sometimes E1 - "S3 Boot Script Execution".
That's all.
If then turn the computer off by holding the power button for several seconds and then turn on, the system boots (restored) normally, as in hibernate mode (if use hybrid sleep mode).
Reset (clear CMOS) BIOS does not help. On the BIOS version 0706 was the same.
Memory tried another - the same effect.
"Internal PLL Overvoltage" value has no effect.
ME firmware 7.1.20.1119 now.
Such a combination of versions of ME firmware and BIOS
7.1.10.1065 and 0706, 7.1.10.1065 and 0902, 7.1.20.1119 and 0902
give the same result for sleep (hybrid sleep) mode.
Could you tell me how to make a working sleep (hybrid sleep) mode?
Thank you!