Covers Intel X58 and X79 Series chipsets
This guide is aimed at beginners who wish to set up the R4E with a manual overclock rather than use the preset profiles. We're going to identify...
The ROG team have put an extensive amount of work into UEFI for the R4E. Most of the settings will not need manual adjustment at all unless you are...
If you’re now updating your motherboard BIOS for any reason, you’ll need to do the CAP conversion. This is a two-step process which we’ve detailed...
1. What is the UEFI Mode? 2. What is Secure boot? 3. UEFI mode requirements 4. What is CSM or how UEFI Drivers and Legacy Option ROMs interface...
INTRODUCTION OK, so first things first: One thing you should know - X79 is picky with RAM! And the RIVE is a high end board that caters for a...
BIOS Flashback
Attached is the insert guide that can be found in the motherboard manual. If you are having trouble booting for the first time try following the...
http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx Theoretical limits: 32-bit Windows: 4GB of system memory...
http://rog.asus.com/44802011/overclocking/rog-oc-key-looking-at-easy-and-deep-overclocking/ :cool:
The purpose of this post and thread is to help make the troubleshooting / RMA process a little easier and to shed light on the proper steps you...
hey all, so after my build i keep getting random popups from Ai suite sometimes to quick to read them but i found this alert log if any one could...
Hallo, Im expiriencing very strange memory behavior. I get Bsod's randomly always pointing towords bad memory. The problem is when i test my...
Hello Guys I would use the offset ... but do not know how to set it! now fixed voltage to 1.320/1.328 If I want to use the offset as I have...
why do i now have to enter a password and a verification code every time i visit this page??? WTF??? it started a night or two ago. my always...
so far I can only get it to post at 2133. with 11-11-11-28 2n only pi stable to 2M On a side note I noticed something disturbing on my mobo while...
Two 840 pro's with IRST 12.0 connected to intel 6gb ports, not seeing the double write speed? any ideas please? Win 7 x64
I believe we have some fan experts around here so I need some advice:p I'm trying to find fans to replace the H100 fans. I'm looking for PWM fans...
Hello guys. First time posting on this particular forum. I apologise if this has been asked before and if the answer is already somewhere here, but...
Hello, I have what I think will be a fairly simple question given the expert level in this group. I want to set up 1 or 2 RAID 1 drives (each...
Hello, Is it normal that when with ERP enabled the PC cold boots twice ? When ERP enabled it happens all the time - the PC turns on , after some 5...
Hi guys. I'm just purchase an ASUS Rampage IV Extreme. I Have some question here. USB power still ON, even when computer is shut down. may be...
Hi all, I'm asking for some confidence around my overclock on my i7 3820 RIVF setup. Below are some screenshots of my bios, and all seems well...
Hi, Had my R4E for a while now. Very happy with it. Had a crash the other night and now my FSB will not stick on 100. At the moment I have it set...
I'm having an annoying problem when upgrading the BIOS of my rampage iv extreme. I have two Intel 520 SSDs in RAID 0. Every time I update the bios,...
Ok, on my Notebook as I'm in the middle of W7 Install. Went quicly through BIOS as really wanted to see my CPU Temp (always when I first install to...
Hi, i have a RIVE since March of 2012 Since one month i detected that two of four ports USB3.0 of I/O no working (i work with this ports), no read,...
I don't have my book with me, but my computer tower has been having issues as of late. I Flashed 4004 to my RIVEX today hoping to even be able to...
I installed BIOS update 4004. Soon after, I installed Ai Suite to check it out. Since installing Ai Suite, when Win7 is restarts, the little network...
first off i'll introduce my rig and the situation: Mobo: Rampage IV Extreme CPU: Intel i7-3930k RAM: G.SKILL Ripjaws Z Series 16GB (4 x 4GB)...
Hi, I have my Rampage IV extreme motherboard setup with 64gb ram and GTX690. I'm using all perfect since last week and it happen suddenly on weekend...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
