©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

5150WS6 · 02-04-2013

Hi guys,Thought I did my research but I must have messed up somewhere. Here's what I have:Asus Rampage Extreme LGA2011 MBI7-3930K 3.2 Sandy bridgeDual EVGA GTX 670 04G-P4-3673-KR SLI cardsDual WD Black 4TB SATA 6.0GB/s HDCorsair Vengeance 64gb(8.x ...

5150WS6 · 03-01-2013

Chino--Well I know 26.7C is not bad as far as temps go.....but even for a water cooled, huge radiator, dual F4 Phantom fans going? It's not a crazy temp, but it still seems hot for the cooling power that I have. Think I should update the BIOS? Or ...

5150WS6 · 02-26-2013

Chino--I know that's what's so freakin frustrating! I can build and put together all these parts from different companies and get a kick a$$ awesome running system and my one hang up is the stupid fans. The hard part was easy and the easy part is h...

5150WS6 · 02-25-2013

Chino--Sorry for the delay brother. But my patience with these fans grows thin Ok so I took apart the case, pull the lower video card, unscrewed the clamp and slowly removed the battery.......I'm kidding. I hit the button on the back LOLHere's wha...

5150WS6 · 02-22-2013

I have a CMOS clear button on the back of the board. Does that do the same thing?

5150WS6 · 02-22-2013

Ok Chino. No dice brother. I plugged it into the 3 pin fan connector on the Lamptron. It went higher than 600rpm, but no faster than it's going right now. By no means did I get the F4 speed we are looking for.And I'm with you. I'm hesitent to up...

User Statistics

User Activity

New build, with errors

Re: New build, with errors

Re: New build, with errors

Re: New build, with errors

Re: New build, with errors

Re: New build, with errors