hax0rmort wrote:Ok, If i put the ssd as a single disk on the raid ports, it will default to AHCI and I won't have to format them right? I can just use what I already have?No, it should default to a AHCI compatible Raid mode. It does NOT default t...
I used to run Raid 5 (3 or more disk with fault tolerance + performance), but somehow I lost 2 disk at once, destroying the array. I keep everything backed up now and use the performance of Raid 0.I just had 2 Crucial MX100 SSD arrive from NewEgg, a...
hax0rmort wrote:ok, so from what I'm hearing, I can set 1-4 as RAID, put the two 1GB drives in RAID1 on port 3 and 4, and put my two ssd (non raid) as independent disks/arrays on port 1 and 2?Yes, that's what I'm saying. I personally run my OS off ...
TheNerdBench wrote:Hum...I thought you could setup RAID 0 or 1 on the ASMEDIA ports 5 & 6...I may be mistaken as it sounds like you gave this an attempt.You can, but ports 1-4 must first be set to raid in the bios. On a side note, if Ports 1-4 are ra...