Bluecow wrote:Also, it says when the M.2 socket is in PCIe 3.0 x4 mode (which I assume I'll want to do, right?), it disables SATA ports 5 and 6. That means I would only have 4 SATA ports. That could be a bit of a problem if I have 2 RAID1 arrays pl...
They all behave the same. But after you bind them toghter dont switch the Sata cables on your mainboard.This will corrupt your raid. Put a mark on each hdd with sata port numbers and never change them.
You can still mix raid and standalone drives. In my case i got 1 hdd raid0, 1 ssd raid0, 2 standalone hdds and one m.2 drive."Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at RAID mode together."All drives will s...