©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

yogg · 10-19-2011

HiI tried to set up an raid 1 array with two Corsair Force GT 120GB SSD drives.So I entered the Marvell Raid configuration with CRTL + M and set up everything.This works fine and I started the installation of Win 7 prof x64.In the setup menue the dri...

yogg · 10-21-2011

No chance to get the controller back to work.The HDD led on the mainboard lights the whole time but nothing happens.I have also tried to flash the BIOS with 1301 and 1208 but no chance.I have now sent the mainboard back. Two to three weeks (maybe mor...

yogg · 10-20-2011

It could also be that the 9128 controller firmware isn't up-to-date enough to work properly with SandForce 3 based SSDs.Is there a way to update the controller? I now have firmware version 1.0.0.1019 on it.I have seen that there is 1.0.0.1029 availab...

yogg · 10-20-2011

Thanks for the answer.So it seems I have to work with the SATA II controller.To the list:- Faulty SATA III Cables or cable/power connections-> I use the SATA III cables that was included to the motherboard ("SATA 6Gb/s" stands on them)- Using an SSD ...

User Statistics

User Activity

Rampage III Extreme Edition Marvell Raid Issue

Re: Rampage III Extreme Edition Marvell Raid Issue

Re: Rampage III Extreme Edition Marvell Raid Issue

Re: Rampage III Extreme Edition Marvell Raid Issue