Search:

Worked very well for me! It's amazing fast now.

Thank you!

Speedstep and undervolting works very well! With 1305 it didn't worked for me, but with 1404 it works now.

http://i47.tinypic.com/1zpo58h.png

Set the "CPU Clock Gen Filter" to Enabled or Disabled, but not let it at Auto.

Feedback pls.

Greetings aznsteil

I'm using my I7 3820 5 Ghz @ 1,52 V to bench only. Cooled by Prolimatech Genesis = 69 °C max.

For daily use I prefer stock speed at offset - 0,15 voltage.

[personal opinion]
Although this cpu...

I am, thanks for sharing.

Greetings aznsteil

Hey Asus Team,

I've waited for this card so long, and now it's there! On the other hand side I'm disapointed. A three slot design again?

[personal opinion]
I think a user who buys this card...

You are welcome :)

Although you should't change a running system, I advice you to upgrade your OC Key firmware to 1013, if It's not already. I did and it still wroks fine.

Greetings aznsteil

Hey maybe this help,


Put your keyboard into the white (!) usb port
Then press the RoG Connect button for three seconds. The OC Key Menue appear.
Wait(!)
If after 1 minute the keyboard...

Guess what: I try to undervolt my 3820 but i cant!

Version: 1202 undervolting offset -0,15 V -> works fine and stable at stock clock
Version: 1305 undervolting offset -0,15V -> voltage does not...

I also think that the Xeon processors are meant. But I've read that these server cpus can not be overclocked at all, just by the bclk, but not via strap and ratio. Is that right?

Greetings aznsteil

@Raja@ASUS

Hey, I've got a question to your guide. You said: "CPU Clock Gen Filter: A setting of Auto is recommened for most overclocking."
I've found out, if you change the option to disabled,...

Ah I remember of something:

When I had an USB PCI card for my board and plugged it in, the system runs significant slower than without it. The card was from "Hama" and I throwed it into the bin....

Hey thank you all for your quick answers!

But what does it mean for the users with this problem now? Wait for an update of the app (IOS, Android ...)? And if it's caused by the software, shouldn't...

Hey guys,

like many users here having problems with the board, I'm one of them. And if somebody knows the solution, he, or she could post it for me :)
I've already read the guide of this website....

Try the new Bios, maybe it will help?

Greetings aznsteil

Thanks for sharing! Downloading it and will report.

Greetings aznsteil

Edit: Flashed it. One significant difference is the Font type in the Bios lol

Hey,

did you try to turn your system on by pressing the internal power on button on the board? Or did you used the front panel power button? Maybe your front panel power switch connector has a...

Hey maybe this might be helpful:

CPU Fan Error problem: Go to the Fan Monitoring and set the CPU Fan at "ignored", then the message won't appear anymore.

Slow boot: Go to "Extreme Tweaker" and...

Here some additional information:

I've the Asus 560 Ti Direct Cu II and installed the new beta driver. Problem: I can not overclock my card over 1000 Mhz as I did with previous drivers. Maximum is...