Search:

Update - Nvidia has not yet released a fix for this problem, they seem to be focused heavily on newer games and 6 series optimizations



Solution: Reinstall Windows 7

I have identifiied the issue and notified nvidia. The next beta driver release will include the fix!


All drivers released after this version 302.82 do not work with Battlefield 3, GTX590 on...

I've spent hours attempting to resolve the issue, but have been unable to find a solution. After performing a clean install of Windows 8 Pro 64 bit and all of the latest drivers I found that my FPS...

Did you update your BIOS to the latest version? Did you update your SSD firmware to the latest version? The updated BIOS on ASUS website should have resolved the dual RAID setup issue.

I updated the instruction set on this thread. Also, I highly suspect that it's your HDD's to blame here. Give me full info on your HDD's

During Windows install when you try to "Load the Driver" try selecting specifically one of these INF files. Try in this order

1) 1.2.0.1014\storport\amd64\mvnodrv.inf
2)...

The 0602 BIOS is rock solid! You need to flash, restart, shutdown then hit the "Clear CMOS" button on the back of your computer. Reconfig all of your settings and you're good to go!

Clearing the...

It's solid runs like a champ. RAID0 performance is roughly the same. If anyone is interested I can update the Jmicron eSATA Option rom to the latest version. Not sure how many people use eSATA on a...

yes, under Tools >> OC Profile >>Start O.C. Profile

Save your image to an external storage device. You can also save the CMOS settings to onboard memory, but it's always good to do both.

check to see if there is a BIOS update for your cards. Every manufacturer has released several BIOS updates for these cards.

0602

Released 11/09/2011
This release includes a Marvell Option ROM update which supports RAID on the Marvell 88SE9182 SATA III Controller
Marvell Option ROM bios version updated from...

Guys, I'm working on a custom modded 0501 BIOS ROM. Updates Include:
- Support for new CPUs
- Added additional memory support
- Updated Jmicron eSATA BIOS version
- Updated Intel ICH10R SATA II...

Yeah full on crazy! I may just get this board when it hits! Couple of nvidia 6 series cards PCIe 3.0 FTW

Rampage IV Extreme Overview: http://www.youtube.com/watch?v=x-lcqRluIFs&feature=feedu...

Here's the ultimate i7 overclocking guide: http://www.overclockers.com/3-step-guide-overclock-core-i3-i5-i7/

It looks like Intel removed those drivers from their download center (probably too many people downloading them)

Try this link:...

If you game a lot, then you definitely want your graphics cards to each run at the full x16. You should be able to slot your RAID card in one of the lower x16 slots and it should default that slot to...

More than likely the solution is one of these items:

1) The Clear CMOS button on the peripheral plate of you motherboard is stuck in the Clear Position
2) The CMOS jumper is missing or set...

Failure rate on RAID 0 with SSD is very low not even approaching 1%. I have never once had a failure and I've been running RAID 0 like crazy for 10 years.

You cannot update the Marvell firmware...

Are you using the Rampage III Black Edition?

Check your motherboard manual for the PCB diagram which indicates which slots are 16x. The Raid card cannot be seated in the same PCIe bus channel as...

It's unfortunate that your Marvell Controller has the issue. You've certainly take all of the right steps to ensure proper operation. It could also be that the 9128 controller firmware isn't...

The Rampage III Extreme has the Marvell 88SE9128 SATA III controller which is only a 1 lane PCIe controller. It can barely support the full bandwidth potential of one SandForce 3 SATA III Drive. If...

Respond to the Poll Above ^

0501

Not an Official Release
Available for download in my Post "how to enable RAID on Marvell 9182"
Supports RAID 0,1 on the Marvell 88SE9182 SATA III...

Rampage III Black Edition BIOS 0505 does NOT support RAID mode on the Marvell 88SE9182 SATA III Controller. I tested it myself. Stick with BIOS 0501 if you want RAID on the 9182 controller. It works...

So you're saying that you cannot get Raid to work on the Marvell 9182 controller at all or only when you set-up a RAID on the Intel controller at the same time? After you built your Marvell RAID 0....

You know what I don't know anyone who is running two RAIDs one on each controller set. It should work, I mean the Gigabyte G1.Assassin board has the same set-up and you can create two RAIDs one on...