Search:

Would like to see the UEFI GOP bios soon, my Titan is arriving in the next few days.

Shows LMS on mine and I removed the old driver before installing the 1345 - 1.5m version from Intel's website. I guess that this gets installed either way now.

Took some inspiration BOLTS, and did the same for the first time. Happy now I can do it myself :)

**Nodens** sorry about the link, just saw it removed.

+1 on this. Fernando has supplied the .FFS

*link removed*

You have to use the USB flashback method to install any modified BIOS.

Another new bios.......

http://dlcdnet.asus.com/pub/ASUS/mb/LGA2011/Rampage_IV_Extreme/Rampage-IV-Extreme-ASUS-3602.zip

Using UEFI, best bet would be to use partedmagic to secure erase the drives, create the RAID again in the BIOS, run UEFI win setup and on the partition page click new. This should then create a GPT...

By the time Haswell comes out, I'll be aching to replace my RIVE for what I'm sure will be the RVE. Although i'm interested in what the x79 refresh will bring

Works fine with the Rampage IV, using chameleon/chimera bootloader. Havent read about the Max V, you'll need to research it in hackintosh sites.

Noticed in the ZIP file, there is also the .efi for the UEFI part.

Maybe this can also be slipstreamed into the BIOS so we have the new driver in UEFI mode.

Nodens maybe??

Thanks, I started this before he did the Red Harbinger, a few months after he finished the L3P D3SK (which had WC but his rads were under the floor!)

Project - DeskIT

http://www.modsrigs.com/detail.aspx?BuildID=31854

Thought I'd share my latest build with you all. Was so impressed by L3P's desk build, I decided to make my own but with a...

Download, change the path to extract to your desktop, then run setup

A new driver appeared on Station-Drivers. 1.3.9.0

http://www.station-drivers.com/page/asmedia.htm

See if that helps your issue. I have been running 1.3.8.0 and had no problems using my BD-ROM,...

I bought the older swiftech kit with the separate res for my first WC setup, then slowly replaced the bits as I went, changing the res, then the block, added rads so I could cool my gtx480. By the...

I have a custom desk, with 2 loops, both have 1 x BlackIce Extreme 360 with 3 x GT1850's, phobia Balancer 150, and a Laing D5 Pump (alphacool plexi pump top) with 1/2ID 5/8OD Tygon Tubing.
...

Also if you are going to go the bitspower route, get all the fittings down on a list and order direct from them (bitspower.com.tw), saves a bundle. Takes a while to get sorted, but worth it as they...

After install, I re-enabled secure boot and have had no issues.

Another bonus for anyone who uses their R4E as a hackintosh. You can now use the raid controller as its device id is now 2822 with a small mod on the appleahci kext. Handy as I was down to just the 2...

Hi Nodens, before using your GPT method, I did a quick reinstall using the 3404 with the 3.5 orom and tested with anvil. Speeds are pretty much the same with either 3.5 or 11.7, using a RAID0 Intel...

Just found out why the change in score, write-back cache doesn't seem to enable on install. if you uncheck, reboot then recheck, 4k writes increases by 2.5x.

Nodens, tried your diskpart method, no...

+1 from me

By looking at other results online, it mainly seems to be writes. Any suggestions on rectifying the alignment issue if that could be the issue? does windows automatically set this up, or would I need...

any chance you could uploads anvil results for your RAID0 so I can compare them to the 3404 bios.

Hi Nodens, is this the same as when you select 'create new' and windows automatically creates 4 partitions? Also, any ideas why using anvil etc, the performance is not so good?