Search:

My problem was a bad video card. out for RMA

Have you tried putting your CPU BUS back to 200 and bumpping your Multipler up so you get 4.6? Some people have better luck that way, just depends on what your CPU likes. If that fails then leave...

I was able to get to 4.6 on my system without changing my CPU bus from auto, I just changed the multiplyer. Your cpu voltage should work at what you have but as long as the temps to go to high then...

After many hours of working, removing my GTX 680 and putting stock coolers back on and also using my MSI 6870, I have found my graphics problem. My first GTX 680 is BAD. I will contact EVGA...

The new Crysis is coming out soon and from what I have read it will surpass BF3 in loading up your video cards and CPU

Yes, I just cought the typo:eek:

Yes, but i can run Prime95 at 4.8ghz and stay under 50c at all times:). I have a few things to do to computer tonight . Lucky I still have my old MSI 6870,s to test the MB with. If they show at...

I was affraid of that I just hope it is not both. I do have another Crosshair V MB but I would also have to swap the NB blocks:(

I am having a lot of problems with my VIdeo cards. I am sure that 1 if not both are possibly bad. I think I have figures out a way to boot from the second card without having to remove a card which...

Just to clairify....my SSD drive is my OS drive.

Yes I am that other person that is having the same problem. I have to go into the BIOS and set my Storage raid (2 samsung 1tb HD's) as my BOOT drive and my Main Drive (samsung SSD raid as my SECOND...

I was looking online and found this:

The device failed due to a badly formed command. This is a run-time issue; The application should destroy and recreate the device.
This was from WIndows web...

DirectX Function "GetDevice RemovedReason" failed with DXGI_ ERROR_ DEVICE_RESET: Device reset Due to badly formed commant.. GPU: "Nvidia GeForce GTX680", Driver: 30142. I have not seen this one...

I know this is off topic but I was wonder, DaemonCantor and Granger, What program do you use to creat you sig's? If you would like to answer in PM that is also ok.

These are some pictures of my latest build. It has not been without trouble but is working very nicly now. Still working on OC but I can tell you that heat is NOT my...

If I want to try my OC'ing with only 2 sticks of mem, what slots should I use? I have heard both...use slots 1 and 3 and I have heard use slots 2 and 4. which is correct, or does it matter?

I understand about underclocking the cards........I did not pay that to UNDERCLOCK them, however, I think I found the problem. Most of the issues are when playing CIV V (my second fav game). I...

I never had problems with my 6870's doing this. That was what i was using before i spent a LOT of money on these. Of course they were much slower.

I have a simple question...I think. I am having a lot of difficulty with my graphics cards, mainly the driver stops working and then recovers, also once in a while I get some kind of RENDER error. ...

Now that I have re-installed Windows and am ready to again OC, I ran some starting point test for my stock setting to see what the OC is giving me. I noticed that in Cinebench and in 3DMARK11 that...

I had a very simular problem with my 16gig of RAM showing up just like yours. I found that the RAM sticks were no seated COMPLETELY in the board. Sometimes you must use a little force to make sure...

I may be wrong but I do not think the BIOS chips were faulty it was just that the FX8150 would not run on some older BIOS versions....I think maybe before 0804???

you can also chose to "Ignor" it in the BIOS as well

Go into the setup tab on Ai suite and uncheck that fan so it is not monitored

I am thinking I might have a PSU that can not handel my OC'ing. If you have read my other post....Stuck at 4.6.... Tomorrow I will switch to my other FX8150 and try that one. If I still have...