Search:

this exact problem is happening to me right now, trying all kind of solution, and nothing seems to work.

seems like i'm forced to open it up to fix it :mad:

check video cards

check RAM sticks

probably some of those are not seated properly

i've been using R4F since early last year, back from March 2012 to now, never had a problem with it.

until i switched to the newer series of the BIOS 3000 and up
the new Win 8 compatible BIOSes...

I'll keep that in mind for the next BIOS release, clearing CMOS is a good idea, as it will also delete everything that was there.

I normally do "Load Optimum Default" after each BIOS upgrade, to...

wait, what? aren't the Black Box Extreme Editions unlocked?!?!

if it's capped, then it defeats the whole purpose of paying the additional bonus for them :mad:

Linux is my main OS, i'd like to see that happen
in the meantime i'm still flashing new BIOS from the EZ flash utility in the BIOS
i only boot back to Windoze when games wont run properly on WINE,...

i've personally RMA a couple of HD7970 and got them replace in about a week

i'll say that's pretty good service

yes, the BIOS seems to mix the info from both Intel + Asmedia ports together, so it shows the incorrect status

it didn't matter if the SSD were plugged to the Intel ports or Asmedia, as it was...

it's a visual bug

the BIOS doesn't show the proper information, even when it's actually detected, the BIOS shows otherwise

it fixes itself after 3 full cycle reboot, this bug is annoying as...

i'm still stuck on the original BIOS 2105

tested
Version 3010
Version 3101
Version 3204
Version 3301

i had to force copy BIOS 2 back to BIOS 1 so i can boot on 2105

that's exactly the problem i'm having

did you write down the old serial number and compared to the new RMAed card serial number?

have you tried hooking up another monitor to the card

what about the little switch that controls the last DVI / DP port? is that one set properly?

the instruction manual had a typo, it was actually the opposite way to get them working properly

running on Water it does really keep your temp down a lot even at full power (4.0+Ghz) it easily stays around 37c to 41c (from the outside, that means inside core Temp are even lower)

I'm using a...

make sure all your adapters are Eyefinity Certified in AMD website

very touch situation, they tend to break easily be extremely careful

i'm running both of my 7970 on MB BIOS 1305, it was crashing like there's no tomorrow before 1305

the only beef i got with my 7970 not working right is the speed, everything else fine

i have two DC2T yet they only work stable as reference 925 Mhz instead of "stock" 1000 Mhz

everything else...

perhaps a fault card?

have you tried getting your new rig stable with any old video card?

if your entire rig runs fine, then it's possible it's just a faulty 7970 which i'm not surprised.
...

definitely a faulty card, you've already tried all the possible troubleshooting steps

just open a RMA ticket

Hmm... this sounds very interesting, I'm going to try that on my 7970 cross fire which has been giving me hell since day one.

i had them set or rather it is set by default as Gen 3, so keeping my...

are you trying to do Eyefinity?

if you do, you will need Eyefinity approved adapters else it will not work

I can run Linux Mint 12 (Ubuntu 11)as a boot OS partition when installed as a single 3TB GPT, so the MB works fine.

it's only a Windows 7 limitation

that's exactly it

find a friend or go back to the computer store ask them to let you borrow any old Phenom II CPU for a quick flash upgrade (assuming you don't have any old AMD CPU around)

i...

when i first got the Crosshair V i had to upgrade my BIOS before I was able to use the FX 8150

lucky i still had my old Phenom II x4 BE still around