Search:

did you set up the ssd drive in ahci mode before installing,also you can run atto, it is a free hard drive benchmark tool to see if you are getting the speeds you should, read and write speeds

when you change it to manual are you typeing in what you want the multiplier to be,example would be 20x would give you 4ghz.also after you type in desired mutiplier number hit enter on your keyboard

your welcome. there are a lot of great members on this site that help everyone,they have helped me so i am glad to help when i can.:) you can also turn the led on the fan off if you want.on the top...

not sure what you are saying, i just built that same motherboard and cpu as you for a friend,all i did was unlocked the cores,it is running at 3.2 mhz on all 4 cores. cpuz readings are multiplier...

if you mean the front case fan it connects here.i attached a pic of mine.just look at the led fan connector, it does not connect to the motherboard , it connects to the actual haf x case wires
...

just curious but can you tell me what if your windows experience index shows a higher rateing when you are running at 4.6 ghz instead of stock speed

your welcome, i hope it works out for you

you can download a program called speccy.it is free,when you run it it will show the wear level of the battery,if the battery is fully charged and speccy shows a very high wear level i would assume...

if it shows 25 gb unallocated you might have to format that partition first and assign a drive lettere to it,then you should be able to delete it

slow speed will eliminate the chance of a bad burn,.4x is useually fine,jmo

you could just burn the iso to disc and boot from dvd,if you deceide to burn the iso you should burn at a slow speed

personally i would replace the stock cooler even if you do not overclock.i would use a better cooler and artic thermal paste.if you run stock with turbo set to on in the bio's you will still turbo up...

thank you it looks great.much appreciated.;)

have you tryed to disable any splash screens in your bio's, not sure if it would disable intel logo but worth a try

4GB G.Skill F3-10600CL8D-4GBHK DDR3-1333 8-8-8-21 1.5V memory ( 2 sticks), isee this set listed on the qvl list but not the second set you listed,this set should be set at xmp timing, i would try to...

also as long as you have bio version 0813 or newer you should not have any problem running the 8120.i would try just the one set of ram and leave the timing to auto instead of manually setting the...

unless i am reading it wrong you have two different types of ram installed,try just one set of ram.as for the cpu fan error i get that same error on first boot .i am useing a hyper evo cooler...

your custom avatar looks great,could you make me one and just subsitute silent shadow with jd2266

your cpu clock speed is jumping around because you have turbo set to on in the bio's.if you want to run at a certain clock speed and maintain that speed just manually set your multiplier to desired...

not sure what you mean.i have a haf x and it's front usb 3 ports connect right to the motherboard .

i am running my 8150 at a little over 4ghz, my v core volts are at 1.344

hwmonitor and speccy,both sre free programs.i use both

have you tried to manually set the timeing and volts for this ram

timeing 11-11-11-31
voltage 1.5v

just wanted to thank you,you were right ,it did not contain the full suite and i had no problem loading the radeon 6850 graphic driver,i installed 12.3 driver though instead of the new 12.4 driver...

just wanted to get another opinion,i finished redoing my pc,the ssd drive added major speed to my old pc,the question i have is that motherboard only has 3gbs sata ports,so the 6gb ssd drive will...