Nice one jd2266
Have you tried throttling back the ram to remove any stability issues from that source. Take them back to 1333 or 1600.
Also stock is not really that back providing its seated correctly. As stated before just watch the thermal load, make sure u disable auto turbos and spectrum spreading, u want to be able to load all 8 cores and keep he load equal. DO NOT take ur core volts above 1.5 in my opinion. Not on air not e en the noctua could cope with a heavy or even a moderate CPU load. For good cooling you could cheat and go for an all in one ( I hasten to call it a water cooler lol) but the twin rad 240mm corsair h100 is good especially when you tinker with it I got an h100 on my 8150 with virtex 120 x4 on push pull setup, they're silent and even when I ask the unit to work hard it's still quiet on my storm trooper case.
I can talk u thru some settings if u wish but until you get a viable cooling solution I'd hold off
Take care people
All I ask is you take the time to fold, just fold when your away, fold when your sleeping. Folding home is the way forward
Especially this is a expensive business lmao... But it's wonderful that it's a family forum... That's why I try to suggest people not to post personal things in the other thread about posting pictures in public like Facebook I've seen multiple duplicates of people even myself had to close it down because once you posts it they can make a duplicate account and friends and family will talk to the duplicate and you'll loose your identity when family and friends says you said this and that when you didn't had that conversation lol And family and friends spilled the beans on your info by talking to your duplicate identity...
Like a family forum they should becareful to posts their identification like mugshot etc... as a parent gotta protect family
If you don't have children... just think of your pets as children and how your worried if your dog or cat is not behaving normally... lol
ASUS Entheustic <3r MOBO RIG: First RIG first custom built myself...
Antec Darkfleet-80 (Antec said it's a new Full Tower ATX.. and also said copied from other ATX..) / Rampage 4 Extreme / Intel i7-3820 (hope to upgrade to i7-3960X but cannot afford on budget atm...) / EVGA 560 Ti OC 256-bit 1GB 4-way SLI Kingston XMP 8 GB 2400 mhz DDR3 / Cool Masters 1000w PSU / Phantek European design Heatsink for LGA 2011 /ASUS Blu-ray Drive / Seagate SSHD 500GB Momentus XT Win 7 64-bit Ultimate / AutoCad2000
Hey guys! Haven't been on for a while and I noticed that alot of you guys replied in this topic of mine!
Lately I haven't tried to much clocking though..
I reached a stable of 4.4ghz on the FX-8150
These are my bios settings :
Multiplier : 22
FSB : 200
V-core : 1.40
Mhz : 4414
Any thought on how to set the correct bios settings to get a stable clock at 5.0ghz?