I tweaked the settings mate. Its a 9-11-10-28 kit for principle timings. I went upto 10-12-11-28 and then tweaked the subtimings. Added a touch of voltage and away you go!!!! It just takes patience and a decent IMC on the CPU which is completely luck!! That kit will do 1T comand rate at upto and slightly above DDR 2450. Which I think is very good. All with the CPU over 5ghz and Linx, Prime and Aida stable.
Intel 3930K 5.5ghz+, DDR2600 , 3570K ,3770K
ASUS RIVE, MVG,MVF,MVE.MIVE,MIVG -EZ
G.Skill RipjawZ,PI and Trident X
ASUS 7970, GTX580,570,470,460 etc etc
Antec HCP 1200w x 2 and Coolermaster 1200w
http://www.hwbot.org/user/8_pack/
The GB Bencher. http://www.team-greatbritain.com/team-gb-members/
Proud to be an ASUS power user!!!
Hey spoony did you take pics of your bios settings including sub timings of that corsair kit??? maybe I can assist. I will check out all subtimings at DDR1600 for you.
Intel 3930K 5.5ghz+, DDR2600 , 3570K ,3770K
ASUS RIVE, MVG,MVF,MVE.MIVE,MIVG -EZ
G.Skill RipjawZ,PI and Trident X
ASUS 7970, GTX580,570,470,460 etc etc
Antec HCP 1200w x 2 and Coolermaster 1200w
http://www.hwbot.org/user/8_pack/
The GB Bencher. http://www.team-greatbritain.com/team-gb-members/
Proud to be an ASUS power user!!!
Been using this new BIOS 0013 since it came out and it works like a charm.
@8 pack what voltage you use with those settings ?
l Asus Rampage 4 Extreme l intel 3930X@ 4800Mhz (1.45volt) 24/7 l Asus matrix GTX 580 l
16GB Team Xtreem DDR3 PC3-20800 2600MHz (11-11-11-28-1) l Coolermaster Silentpro 1000w PSU l Revodrive3 ssd l WD Raptor 150Gb (10000rpm) l Corsair H100 wc with 4 Cougar Vortex fans l CM HAF 932 Avanced case l Acer X243H 24'' l Asus RT N66U Dark Knight l Logitech Z2300 speakers
In progress the custom build PC Samurai Warrior ''Miyamoto Musashi'' in Japanese ''宮本 武蔵'' made by Pascal
OK Problem solved:
Now running BIOS 0013 , seems when I originally installed it, my boot drive sequence was altered somehow. Now working fine![]()
After use this BIOS. In the Boots Menu there is no [Focus BIOC] or [Keep Current] button