Question regarding AR3E AND 950 (overclock)

[Probedemon]

Hello Evryone

I would like to ask if bellow specs are "correct" for OC an I7 950 Any suggestions are welcome and or potions are very welcome.

BCLK 180
Multi X 23
CPU-V 1.318
Dram C V 1.375
Dram Bus V 1.643
CPU PLL 1.815
Core spead 4.1 GHZ
HT OFF
Idle Temp 36C
Prime 95 Teamp 66C

Comp Specs
I7 950 Rev.D0
Asus rampage 3 extr. latest bios
OCZ 1600MHZ 1.65V (9-9-9-24)
BFG 1200W PSU
asus gtx460
OCZ vertex 64GB

Thank You
Mark.

[Hapatingjaky]

Hello Evryone

I would like to ask if bellow specs are "correct" for OC an I7 950 Any suggestions are welcome and or potions are very welcome.

BCLK 180
Multi X 23
CPU-V 1.318
Dram C V 1.375
Dram Bus V 1.643
CPU PLL 1.815
Core spead 4.1 GHZ
HT OFF
Idle Temp 36C
Prime 95 Teamp 66C

Comp Specs
I7 950 Rev.D0
Asus rampage 3 extr. latest bios
OCZ 1600MHZ 1.65V (9-9-9-24)
BFG 1200W PSU
asus gtx460
OCZ vertex 64GB

Thank You
Mark.

That looks good, although you should can enable HT at those settings, unless you make no use of HT. And I take it your ram is running at 1440MHz, you might be able to tighten timings for some extra performance.

[Probedemon]

Yes you are absolutely right, my ram is running at 1440... how to tighten the timings (noob here )

or to what timings i should say....?

[glw165]

see what the cas is on ur ram then go to mem timing control, what cpu cooler u have? asking becauseu can get lil more out of the chip like 21x210 1.4 vcore 1.3 qpi/dram

[Probedemon]

I am using a water block by Koolance CPU-360

[Probedemon]

Below is what i have reached so far:

BCLK 184
Multi X 23
CPU-V 1.318
Dram C V 1.375
Dram Bus V 1.643
CPU PLL 1.815
Core spead 4.25 GHZ
HT OFF
Idle Temp 35C
Prime 95 Teamp 65C

Comp Specs
I7 950 Rev.D0
Asus rampage 3 extr. latest bios
OCZ 1600MHZ 1.65V (9-9-9-24)
BFG 1200W PSU
asus gtx460
OCZ vertex 64GB

Note: still dont know what to tighten up RAM timings and what they will help me with