+ Reply to Thread
Page 5 of 22 FirstFirst ... 3 4 5 6 7 15 ... LastLast
Results 41 to 50 of 220

Thread: Radeon HD 7970 DC2 TOP - Issues

  1. #41
    ROG Enthusiast AllGamer +10
    Join Date
    Apr 2012
    Posts
    61

    i kinda found the same issue
    if i down clock it to Reference card settings / speed i can run them fine
    but if i keep them on stock 1000 Mhz, then it only runs in a few games, but crashes on the more demanding ones.

  2. #42
    New ROGer acnx +10
    Join Date
    Apr 2012
    Posts
    1

    hey all,

    i ordered a ASUS 7970 DCII TOP today.
    man, if i get the same problems...


    i will stay in contact with you.

    greets from austria

  3. #43
    ROG Enthusiast stitch +10 stitch's Avatar
    Join Date
    Apr 2012
    Location
    Winnipeg, Manitoba
    Posts
    46

    Here's something different... Has anyone else switched the BIOS mode on their DC2T to see if the other one is more stable?
    Proteus:
    Windows 7 Ultimate x64 SP1 | ASUS P8Z68-V Pro/GEN3 | Intel Core i7 2600K @ 3.4 GHz | 16GB PC3-12800 Corsair Vengeance LP | EVGA GeForce GTX 680 FTW+ LE 4GB | Creative X-Fi Titanium (not installed) | Intel 520 120GB (Intel Smart Response Tech enabled) | 2x WD Black 500GB RAID 0 | 2x WD Black 640GB | Corsair AX850 850W PSU | 2x Dell 2007WFP 20" @ 1680x1050 (DVI) | Samsung SyncMaster F2380 23" @ 1920x1080 (HDMI)

  4. #44
    ROG Enthusiast Sarg_Scorpio +10
    Join Date
    Apr 2012
    Posts
    46

    this is something i do not know how to do.... please explain if you could

  5. #45
    ROG Enthusiast stitch +10 stitch's Avatar
    Join Date
    Apr 2012
    Location
    Winnipeg, Manitoba
    Posts
    46

    There is a tiny switch on the PCB of the card that faces out towards the side panel of your case towards the Crossfire connector, you have to look closely to see it. Shut your computer down then slide it towards the Crossfire connectors. Note: it toggles the DisplayPort port closest to the motherboard off and enables Dual Link DVI on the DVI port above the disabled DisplayPort port.

    UPDATE: Crashed my system this morning testing Kerbal Space Program (it was a 7970 crash e.g. coloured screens and hard lock). So it could be power saving after the system sitting idle that helps to break things. *sigh*
    Last edited by stitch; 05-01-2012 at 01:59 PM.
    Proteus:
    Windows 7 Ultimate x64 SP1 | ASUS P8Z68-V Pro/GEN3 | Intel Core i7 2600K @ 3.4 GHz | 16GB PC3-12800 Corsair Vengeance LP | EVGA GeForce GTX 680 FTW+ LE 4GB | Creative X-Fi Titanium (not installed) | Intel 520 120GB (Intel Smart Response Tech enabled) | 2x WD Black 500GB RAID 0 | 2x WD Black 640GB | Corsair AX850 850W PSU | 2x Dell 2007WFP 20" @ 1680x1050 (DVI) | Samsung SyncMaster F2380 23" @ 1920x1080 (HDMI)

  6. #46
    ROG Enthusiast AllGamer +10
    Join Date
    Apr 2012
    Posts
    61

    hmm.... now that you mentioned that it does sounds familiar...

    when my full rig is on non power saving mode, as in i manual over ride everything, it's 90% stable
    but when i let the video / mobo / cpu go iddle with power saving features enabled, things can go a bit crazy

    i didn't pay much attention to that but now that you bring it up, i'll try that again and see if i can get my 2x 7970 to work more stable.

    i can be playing a few hours fine, and then BAMP! all of the sudden it does that colourful hard lock on me, and i need to hit the reset switch again.

    nothing more tedious than doing a few hours of RPG game play and all of the sudden it dies, and the last save was from several hours ago

  7. #47
    New ROGer xyza +10
    Join Date
    May 2012
    Posts
    1

    hi i just want to confirm something, is this issue is not on the 7970 direct cu ii but only on the 7970 direct cu ii TOP?

    i am currently choosing parts for a LGA1155 system

    internals
    i7 2700k (will overclock)
    corsair h80 cooler
    corsair vengeance 16GB 2x8GB (will overclock)
    asus sabertooth z77
    asus 7970 direct cu ii (will overclock)
    corsair AX750 PSU (might upgrade psu, user will be running multiple screens or is 750 enough?)

    case
    corsair 600tm or the white version.

  8. #48
    ROG Enthusiast Sarg_Scorpio +10
    Join Date
    Apr 2012
    Posts
    46

    as far as i know its most 7900 range and all brands from what other forums say. ive seen 7950/70's and a few brands but we are mainly talking about the asus 7970 DCU ii Top, seems AMD drivers so i dont think it will matter what card....

  9. #49
    ROG Enthusiast marpole +10 marpole's Avatar
    Join Date
    Dec 2011
    Location
    canada
    Posts
    32

    I noticed that Newegg does not show the Asus HD7970 DC2 anymore as of yesterday. Not sure if it's related to the issues here but it seems odd.
    MB:Asus Crosshair V Formula, CPU:AMD Phenom X6 1090T@4GHz, MEM:8GB Corsair XMS3 2000@1838, GPU:HD7850 @1210/1375MHz@1.14v, SOUND:Asus Xonar Essence ST, PSU:Seasonic X-850, Monitor: Dell U2410

  10. #50
    ROG Enthusiast Sarg_Scorpio +10
    Join Date
    Apr 2012
    Posts
    46

    Newegg i think has no more stock.... there does seem to be a shortage of 7970 DCU ii however they are still on amazon.com

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts