We want fan xpert 2 support for maximus IV boards

[Kötü Adam]

Hi dear rog forum users
I have a maximus iv gene-z/gen3 motherboard and I have different size case fans
I have a high rpm pwm fan and two 20 cm fans (3pin) in my case but I cant set diffrent percentage for every fan
This is a VERY BIG problem for me
Can they (asus developers) release a bios update and make fan xpert 2 with maximus iv series boards?
I think they can
If you can please do it
Sincerely all maximus iv mobo users I've met
----------
Sorry for my bad english if it's bad

[WhitePaw]

Get a fan controller....

[Kötü Adam]

Get a fan controller....

ahh...
can fan controllers control fans automatically by temperature sensor
the answer is NO
But bios can do it
Did you understand
I want to assign diffrent rules for diffrent fans

[SpoonerUK]

My Lamptron 8 channel fan controller, as well as my Aquaero 5 XT both have temperature monitoring > Fan speed threshold settings. I stopped using motherboard fan headers a long time ago, as they run the risk of pulling too much power and blowing motherboards...

img1641va.jpg

[Kötü Adam]

My Lamptron 8 channel fan controller, as well as my Aquaero 5 XT both have temperature monitoring > Fan speed threshold settings. I stopped using motherboard fan headers a long time ago, as they run the risk of pulling too much power and blowing motherboards...

Attachment 7539

this is nice but I want to enhance my motherboard's fan controller

[Atheus]

Sounds interesting. I didn't notice the Fan Xpert 2 software existed. Would be a much more reasonable option for most than a $225 fan controller like SpoonerUK is pushing. If my $170 motherboard can do the same thing drawing less power, I'm all for it. On the same token, if you're looking at a $225 fan controller just for that purpose, I guess you might just as well put that money into a Maximus V of some sort instead.

[Area 66]

Raja or another one will correct me, but is not Fan Xpert II design only for Series 7 motherboard like the Gene V ? and if I'm right it's hardware based, if so well get a Gene V because it will need more than a Bios tweaking. This is part of the game guys , you want new features, you buy new boards.

[SpoonerUK]

Sounds interesting. I didn't notice the Fan Xpert 2 software existed. Would be a much more reasonable option for most than a $225 fan controller like SpoonerUK is pushing. If my $170 motherboard can do the same thing drawing less power, I'm all for it. On the same token, if you're looking at a $225 fan controller just for that purpose, I guess you might just as well put that money into a Maximus V of some sort instead.

The Lamptron is only $70.... The Aquaero is more expensive, but that is really more pointed at watercooling rigs.

http://www.mountainmods.com/lamptron...ack-p-622.html

[blackprint]

Hi dear rog forum users
I have a maximus iv gene-z/gen3 motherboard and I have different size case fans
I have a high rpm pwm fan and two 20 cm fans (3pin) in my case but I cant set diffrent percentage for every fan
This is a VERY BIG problem for me
Can they (asus developers) release a bios update and make fan xpert 2 with maximus iv series boards?
I think they can
If you can please do it
Sincerely all maximus iv mobo users I've met
----------
Sorry for my bad english if it's bad

http://rog.asus.com/78012012/overclo...-of-fan-xpert/

here is your answer !

[lagittaja]

Just download it and install it haha.

Downloaded the v1.00.15 .zip from Softpedia, uninstalled FanXpert and installed FanXpert2, didn't even need to reboot..
http://imgur.com/BkMHZBc,TERYFnj,uUUlohU,FocLMuK
Of course now I already have downloaded MVG AISuite from which I got the newest (?) V1.00.18. Works just fine.