+ Reply to Thread
Page 2 of 13 FirstFirst 1 2 3 4 12 ... LastLast
Results 11 to 20 of 126

Thread: Standby problems with OC - locked multiplier at 12x after wakeup

  1. #11
    ROG Guru: Orange Belt mdzcpa +10
    Join Date
    Nov 2011
    Location
    Detroit
    Posts
    362

    How are you checking your multiplier movement under load? I assume your watching your multiplier under CPU Z and loading the system with Prime95, Super Pi, etc ?
    3960X @ 5.1Ghz
    Asus Rampage IV Extreme 1005
    32GB (8 x 4) Gskill Ripjaw Z @2133
    Asus HD 7970 x 2 Crossfire
    OS & Apps: Crucial M4 256GB
    Games: Crucial M4 512GB
    TV & Video: 300G Raptor
    Storage: WD Black 2TB
    Corsair AX1200
    Corsair 800D
    CPU/Video/Mobo Koolance Water Cooled

  2. #12
    ROG Guru: Orange Belt mdzcpa +10
    Join Date
    Nov 2011
    Location
    Detroit
    Posts
    362

    Also, when using offset mode to OC, it's best to use By All Cores when adjusting your multiplier.
    3960X @ 5.1Ghz
    Asus Rampage IV Extreme 1005
    32GB (8 x 4) Gskill Ripjaw Z @2133
    Asus HD 7970 x 2 Crossfire
    OS & Apps: Crucial M4 256GB
    Games: Crucial M4 512GB
    TV & Video: 300G Raptor
    Storage: WD Black 2TB
    Corsair AX1200
    Corsair 800D
    CPU/Video/Mobo Koolance Water Cooled

  3. #13
    ROG Enthusiast Atlas100 +10
    Join Date
    Apr 2012
    Posts
    36

    Yep using "By All Cores" - can be adjusted in OS

    Multiplier check via CPU-Z and Prime 95

    Vcore is adjusted via Offset and system is prime95 stable with these settings!

  4. #14
    ROG Guru: Orange Belt mdzcpa +10
    Join Date
    Nov 2011
    Location
    Detroit
    Posts
    362

    Hmmmm. I need to think on this one..

    If you load BIOS defualts then awaking from stand by with working multipliers is ok...right?
    3960X @ 5.1Ghz
    Asus Rampage IV Extreme 1005
    32GB (8 x 4) Gskill Ripjaw Z @2133
    Asus HD 7970 x 2 Crossfire
    OS & Apps: Crucial M4 256GB
    Games: Crucial M4 512GB
    TV & Video: 300G Raptor
    Storage: WD Black 2TB
    Corsair AX1200
    Corsair 800D
    CPU/Video/Mobo Koolance Water Cooled

  5. #15
    ROG Guru: Orange Belt mdzcpa +10
    Join Date
    Nov 2011
    Location
    Detroit
    Posts
    362

    Locking on a 12 multiplier coming out of sleep or stand by sounds like a Failed Overclock symptom which leads me to believe this still could be a general instability issue. Is the memory your have an X79 tuned kit? Have you tried rampage tweak mode 1. Perhaps bumping the VCCSA AND VTT?
    3960X @ 5.1Ghz
    Asus Rampage IV Extreme 1005
    32GB (8 x 4) Gskill Ripjaw Z @2133
    Asus HD 7970 x 2 Crossfire
    OS & Apps: Crucial M4 256GB
    Games: Crucial M4 512GB
    TV & Video: 300G Raptor
    Storage: WD Black 2TB
    Corsair AX1200
    Corsair 800D
    CPU/Video/Mobo Koolance Water Cooled

  6. #16
    ROG Enthusiast Atlas100 +10
    Join Date
    Apr 2012
    Posts
    36

    Yep everything @stock and i dont have any probs and the multipler changes as ist should be After resume.

    I already increased VCCSA and VTT
    I also tried to keep the RAM @stock (1333) and still got the locking issue?!

  7. #17
    ROG Enthusiast GetMax +10
    Join Date
    Dec 2011
    Location
    Sweden
    Posts
    37

    I have the exact same issue. It feels like I've tried everything but the problem still persists.
    Intel 3930K @ 3.8ghz C1 @ Offset Auto @1.3V
    ASUS Rampage IV Extreme (BIOS-1201)
    16 gb Corsair Dominator GT 2133mhz cas 9 @ 1.5V
    EVGA Classified GTX570 SLI
    Intel 320 SSD
    Corsair AX1200 1200w PSU
    Corsair 600T
    Creative X-FI Fatal1ty Pro
    Logitech G15 Keyboard

  8. #18
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,836

    Let me get things a little tidy here please.

    BIOS 1202
    Boot into BIOS F5 enter.
    F10 enter.

    Boot into OS
    Power plan settings OS are reset to defaults
    System multi is normal
    Put system to sleep
    Wake system
    System multi is locked at 12

    Please confirm that you have done exactly as listed above and the outcome is exactly as state.

    No deviations. no other settings used in BIOS?
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  9. #19
    ROG Enthusiast Atlas100 +10
    Join Date
    Apr 2012
    Posts
    36

    hi there,

    YEP - Multiplier is locked after applying your settings!!!
    And no - no other settings changed except that I set CPU FAN RPM detection to "ignore" due to using a watercooled system....


    So ist must be some "normal" setting in the BIOS that has nothing to do with the OC itself!!!!

    I think the first milestone to a solution!

  10. #20
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,836

    We want more than that milestone we want a solution.

    But I do know what you mean.

    Let me try and see if I can duplicate this behaviour. I need to pull out a motherboard and install the same OS. Think I have tried once before and could not do it. At least we have ticked one possible thing off the list.
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts