+ Reply to Thread
Results 1 to 4 of 4

Thread: need help suggestions pls

  1. #1
    ROG Member Fei Fei +10
    Join Date
    Apr 2012
    Location
    Shanghai China
    Posts
    9

    need help suggestions pls

    i've been using prime95 for the past hour and my cpu temp is at 64 degrees but is this save?
    Attached Images
    Win7 Ultimate - I7 2700k 4.6mhz - Maximus V Gene - 2x4 gb corsair 1600mhz
    Asus gtx580 Direct Cu II - Crucial M4 128gb - Western Digital 1TB - Hyper 412

  2. #2
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,834

    That is quite good that is indeed save.

    Well done
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  3. #3
    ROG Member Fei Fei +10
    Join Date
    Apr 2012
    Location
    Shanghai China
    Posts
    9

    ok and whats normal idle temp and on full load temp on cpu? Just to be sure i dont overheat it.
    Win7 Ultimate - I7 2700k 4.6mhz - Maximus V Gene - 2x4 gb corsair 1600mhz
    Asus gtx580 Direct Cu II - Crucial M4 128gb - Western Digital 1TB - Hyper 412

  4. #4
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,834

    Normal at what ambient temp? If your house is 32'C hot then your temp would be more than mine if my house is 16'C. So you ask a very difficult question. If your temp is 62'C when under load of prime then you are good.
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts