+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Welcome to the Darkside...

  1. #1
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22

    Welcome to the Darkside...HAF 932 RoG...

    Here are some pics of my constantly under construction Darkside HAF 932 build...


    2012-04-15 13-37-43.050.jpg2012-04-16 00-52-27.868.jpg2012-04-16 00-54-51.655.jpg2012-04-16 00-54-23.775.jpg

    Skipping the current AM3+ build because I was concentrating on building my Cooling System. We'll see what comes next but this is what I have so far for my budget system...

    Crosshair IV Formula
    -{955 BE}----> Now 1100T
    -{XFX 5770}----> Now Sapphire Radeon 6870 (x2) soon as I get waterblocks I'll b xFiring.
    EK Custom loop
    Corsair HX850w PSU
    1TB RAID 0
    Win 7 Ultimate 64bit OEM
    Sleeved with MDPC-x sleeving. Gotta sleeve the fresh cables.

    My loop consists of FC and Supreme HF Classified w/ EK Black Nickel Comps, BitsPower Barbs for FC to CPU PrimoChill LRT, EK Dual DDC v2 block, Liquid Fusion 250 Res and Black Ice GT Stealth 360 topped with Yate Loon D12SM-12C pulling through Phobya 7mm shroud/Decouplers. Running GSkill 1600 Snipers for the time being, but will be going back to Dominator GTs' 2000 series. It had 1333 series when I first started out but only 4x2. As you can see, I'm running 2 sticks of 2x4. The price was right and needed a stable overclock without sacrificing capacity so I went with them. So now that my CPU loop is done I'm gonna recover a bit and save for my next ROG board.

    ROG FTW!

    ~Ceadder
    Last edited by Ceadderman; 05-13-2012 at 03:16 AM.
    I fold for Team OCN but I support Team ROG you guys ROCK!

  2. #2
    ROG Guru: Orange Belt Giannis996 +10 Giannis996's Avatar
    Join Date
    Mar 2012
    Location
    Crete
    Posts
    320

    nice build especially the t virus reservoir is awesome!!!
    Project Name: Alice
    Motherboard: Maximus V Extreme
    Prossesor: Intel Core i7 3770K
    Graphic Card: Asus GTX670 2Gb
    Power Supply: Nitrox FP-650
    Ram: Corsair Vegeance 8Gb 1600Mhz
    Case: Corsair Obsidian 650D
    SSD: 2x OCZ Vertex 4 128Gb Raid 0

  3. #3
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22

    Thank you Giannis996. I actually lucked into this Reservoir. Had intended to go with the MultiOption 250 Advanced but a Mate was getting rid of his Res and you couldn't beat the price regardless of what Reservoir you could point to(Free is a GREAT price! ) online. His UV Cat was busted so I'm gonna mod in a Red Cat to stay with the theme. Should make these Helices sing.
    I fold for Team OCN but I support Team ROG you guys ROCK!

  4. #4
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22

    So, now that I've got a 6core CPU to upgrade to I'm going to be selling the 955 BE and hopefully getting enough from it to get 2000 Dominator GTs' to replace the RAM that I have atm. I got Doms 1333 AMD Edition back when I first built this machine, but having four slots filled really curbed my OCs' so I went with what I could afford at the time and that was GSkill Snipers. Not too bad for a low power system but that too limited my Overclocks even though I was down to 2 sticks @ 8Gigs.

    Anyone got any Recommendations for a Waterblock once I go back to Doms? I would like it as tight to the footprint of the RAM as possible with very little overhang if at all possible. Input would be much appreciated. Thanks.

    ~Ceadder
    I fold for Team OCN but I support Team ROG you guys ROCK!

  5. #5
    ROG Guru: White Belt RoG +10 RoG's Avatar
    Join Date
    Dec 2010
    Location
    Behind my PC
    Posts
    118

    yeah the reservoir is awesome, keep it up!

  6. #6
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22

    Just upgraded to 1100T and got 2 Sapphire Radeon 6870. With not much in the way or room left in the PCI slot area am leaving the 2nd GPU out til I get waterblocks for them.

    Average temp went up from 32c to 40c @ load from lapped 955 BE to an unlapped 1100T but that's gonna change after Chimp Challenge. Gonna lapp that bad boy but good.

    Also added a 2m NZXT red LED light strand and a 15" Logysis CCL to the mizx. And tacked together a pair of 3mm LEDs' for the EK Supreme block.



    Once I get a couple pics done I'll be updating with some better looking ones than I started with.

    ~Ceadder
    I fold for Team OCN but I support Team ROG you guys ROCK!

  7. #7
    G'old Belt Member chrsplmr +150 chrsplmr +150 chrsplmr's Avatar
    Join Date
    Jul 2011
    Posts
    4,561

    CeadderMan .... ur our kinda ROG'r brother ...... delicious.
    The fact that it is a CrossHair/1100T sweetens the pot for me.. yum.
    Awesome.
    Welcome to ROG.c.

  8. #8
    ROG Guru: White Belt jd2266 +10 jd2266's Avatar
    Join Date
    Feb 2012
    Posts
    87

    your build is awesome
    asus crosshair v ,fx8150 cpu, 16 gb g skill 1600,sapphire radeon 6870 ,mushkin 120 gb enhanced chronos sata III ssd.seagate barracuda 1tb sata 6gb storage drive,asus black blu ray burner,asus 24x dvd burner,cooler master half x blue edition with added 200mm top fan,rosewill 800 watt modular lightining series ps,cooler master hyper 212 evo .artic 5 thermal compound,vantec spectrum fan card with dual 70mm fans,nzxt 2mm led sleeved light kit,win 7 ultimate 64 bit,logitech z623 200 watt speakers

  9. #9
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22

    Thanks guys. I got a HUGE mod slated for this 932. But I wanted to get the internals sorted out first. Wish I had a sponsor but I make due/do where I can. Soon as I get my dremel I'm goin ta werk on this beastie.

    ~Ceadder
    I fold for Team OCN but I support Team ROG you guys ROCK!

  10. #10
    ROG Member Ceadderman +10
    Join Date
    Mar 2012
    Location
    Oldandstale, WA
    Posts
    22



    Looking around to see what options I have for Sapphire HD 6870 Radeon. Split the cooler off the 2nd one an it looks like I should be able to run EK blocks on it.

    ~Ceadder
    Last edited by Ceadderman; 05-11-2012 at 11:56 PM.
    I fold for Team OCN but I support Team ROG you guys ROCK!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts