04-23-2012 09:13 AM - last edited on 03-06-2024 09:01 PM by ROGBot
04-23-2012 04:16 PM
04-24-2012 01:44 AM
xeromist wrote:
Have you tried with another monitor and had the same problem? This sounds like it might be a problem with the computer, not monitor.
04-24-2012 08:48 AM
04-24-2012 11:18 PM
xeromist wrote:
Yes that is normal to not see the boot logo. It takes a few seconds to come out of standby mode. If you need to see the post then I would either use Pause to stop posting or use the input button to cycle through and make sure that it is not in standby when you turn the PC on.
As to your problem, without any error information it is going to be hard to pin down. You could always check the Windows Event Log Viewer but if you are going to do that I would wait a few minutes after the black screen before restarting. The process of restarting puts a lot of entries in the log so the timestamps can be confusing if you restart immediately after a problem. But honestly I would try a TV or another monitor if you possibly can. That would be the easiest way to eliminate or confirm the source of the problem.
04-24-2012 11:23 PM
04-25-2012 02:45 AM
Myk SilentShadow wrote:
Hmmm maybe i'm crazy...call me if I am lol, have you tried using the HDMI cable from your card to your monitor? maybe the dvi cable is not so good.
04-25-2012 11:00 AM
04-27-2012 01:35 AM
xeromist wrote:
All of the above look like they are related to restart of the machine. That doesn't really tell you anything about the black screen unfortunately. 😞
04-27-2012 12:25 PM