OverClock help needed

[Excalibur]

Hi all having a go at overclocking and just needed a bit of help! I have a phenom ii x4 965 3.4 mhz black on a chf4 mb,so far i have oc the cpu to 3.9mhz and the fsb to 300 nb to 2400 and ht to 2400 does this seem ok? Ive read that the nb should be 3 times the memory and mine is 1600 ddr3 so 800 mhzx3 is the 2400 but wasnt sure about the ht speed also the voltage's are stock except the memory which is 1.65 as it says on the sticks all seems stable though so should i be upping the volts and if so what to.Thanks for your help .Steve.

[HiVizMan]

Maybe I am getting old : )

But what are you asking help on?

If you want to increase your overclock you will at some point need to increase your voltages to the vcore yes, at the moment all you really need to do is slowly increase the multi one level at a time. You will need to watch temps big time with those CPU's

[Excalibur]

Hi sorry for how i put it lol. I have already over clocked the cpu from 3.4 to 3.9 and fsb from 200 to 300.the question i wanted to ask is,have i changed the nb and ht correct 2400mhz 3 times 800mhz so i take it the nb is correct but i wasn't sure about the ht speed i set it to 2400 as well is this correct and as for voltages i haven't needed to increase any as of yet and it is stable so should i just up them a touch to be safe.The temps should be fine i have a really good water cooling set up thanks for the help.steve

[HiVizMan]

Yes it all appears spot on.