Project - The Next Level -

[PasLis]

Thanks GOR52 and your right about that. No but they are welcome to sponsor me.

[kkn]

nice woodwork mister
oil/lacker it?

[PasLis]

Thanks kkn and im gonna finish it with varnish.

[kkn]

good good.
will protect the wood and make it stronger
your a man of menny talents i say :P

[PasLis]

Idd and thanks again for your kind words.

[PasLis]

Update 13.

This weekend i made some progress again.First i made the cover for the desk feet.

First i cut the cover.





Then i bend the cover.





Because it was not possible to bend the whole cover i had to let to small pieces open.
For this i cut 2 little pieces of metal and spotwelded them.







Then i welded the cover and id some sanding.

[PasLis]

The cover is finisht and this is how the cover looks.







Then it was time to work on the oak top for the desk.

The top.







To give the top the same design as the desk ik had to saw the corners.





Then i sanded the corners.

[PasLis]

This is how the top looks on the desk.





The top is not finisht yett so more in the next update.

More to come.


Thanks to my sponsors :

[PasLis]

Update 14.

This weekend i did some modding again.First i started with cutting out the hole for the panel column and then sanded the top.

First i draw the hole.



Then i cut it out whit a jigsaw and sanded the hole.



Time to fit the top.





Fits like a glove so time to sand and degrease the top.



The top im gonna paint with bootslak its paint for boats and its abrasion resistant .



Put on the first layer.I can repaint it after 24 hours





I want to put on 3 layers a side so its gonna take some time.Mean while im drawning some parts im needing for the inside of the desk.

More to come.

[PasLis]

Thanks to my sponsors :