+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 32

Thread: Sabertooth with 3570k problem

  1. #1
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    Sabertooth with 3570k problem

    Good day!

    I went for a RMA V gene to a z77 sabertooth. I am still working into making the system stable. I wanted to use the IGPU to run a second monitor but its not even appearing into my BIOS. Under the tab it should be. Here is a pic of what I get.
    bios.jpg


    I tryed to remove my 7970 from in there and restart the computer, clearing cmos and I still get black screen from my display. Any idea??

    Mat

  2. #2
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,883

    Go into BIOS and F5 to defaults settings - Enter
    F10 and enter to save and reboot.

    Remove your discrete gpu and power on. Should come up just fine.

    If not clear CMOS with your graphic card out of the system.
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  3. #3
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    Tryed all you mentionned. Afted clearing Cmos and restating the display is still not getting any signal and I have the VGA led and boot device led turn on on the board. THat is with the HDMI connected to the board and without the 7970 in there. Could be be a defect CPU?

    regards

  4. #4
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,883

    And what are you connecting the HDMI too? If a TV set you will have problems if the native res is not supported.
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  5. #5
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    Nha its my reg monitor Flatron W2353V. The VGA led and boot system led stays open witch I found really weird. I am typing from my other computer and I haven't touch anything else yet.

  6. #6
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    Found this thread on intel boards.

    http://communities.intel.com/thread/28970?tstart=0

    I am getting mostly the exact same symptoms.

  7. #7
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,883

    Did you download the tool that they speak off and if so what was the out come?
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  8. #8
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    thanks for the reply.


    Yeah I did and everything seems fine from what I am getting into this. It identify my processor and all the clocking are fine. It says notting about igpu. I am just back from a local store where they tryed severale processor on my board and they tryed my processor on a asus v gene to and notting, can't get any IGPU to work. Been there for 2 hours. So I am guessing its notting about the hardware (on motherboard side) has the hardware is working perfectly. Will keep investigating.

    Mat

  9. #9
    Super Moderator HiVizMan +150 HiVizMan +150 HiVizMan's Avatar
    Join Date
    Dec 2011
    Location
    London
    Posts
    12,883

    Cheers Mat - so it is the CPU not the motherboard.

    Not sure to be happy or sad for you.
    3 series MIVE, MIVG BIOS FLASH GUIDE
    RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install

    ONLY IF 2003 BIOS or NEWER
    To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback

  10. #10
    ROG Enthusiast Narth +10
    Join Date
    Apr 2012
    Posts
    33

    hey

    Actually we don't know as we tryed 3 different 3570k on both board and none of them would display the IGPU. One of my friend is providing screen shot with a tech from Asus atm. I am waiting on news. Will let you know what comes out of it. I know these are all pretty new hardware and there is much to be done

    Mat

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts