Hi everyone . So I decided i wanted to oc and opted for water cooling. Installation of the loop went great. I went into my bios to start making changes to c and quiet etc when I noticed fan speed on my number 3 header 4k rpm. I have no fans rated for that speed. I took the fan and connected to a different header and it shows the right speed. I took an original case fan and put it on the suspect header and same result, twice the speed of the fan registers. I decided to update the bios from 901 to 1102 and no changes . Flash was successful. Here are a couple screen shots of my info. I have no idea how long this has been this way since I have been uses the stock haf 932 case fans and they run slow so i may have never noticed. I used to have a 200mm coolermaster fan on that header and I believe it was reading 1400rpm when it should only have been 700rpm. Any help is appreciated ty.