thank you for your help m8
thank you for your help m8
Hi guys. Was hopeing someone could please help with this. I just installed my new 3770K today into my Maximus IV GENE-Z/GEN 3. I keep getting a pop-up warning saying " WARNING IGPU Voltage 0.000 V"
I got this with Bios 3304 and still on 3305 after update.... Anyone have any ideas why? 3770K is set at default.
Thanks in advance folks.
are you using more then 1 monitor program? AIsuite2 is #1 cpuZ would be #2 and it will result i errors like voltage 0,000V
only use 1 monitor program at a time
Last edited by peabrains; 05-11-2012 at 09:40 PM.
because just now as i was loading cpuz, a pop-up warning came up saying that my DRAM was at 0.000 V
then i checked it in AI suite and everything seemed to be fine.Im at stock bios though, but it really isnt a bother to me since everything is working normal, and it only happened when i was loading up CPUZ, so im not sure lol.
just check to see your voltages are good, prob its just a bug as i said or just wait to hear from someone else.
FWIW, I just switched from a 2600K to the 3770K and man what a difference on this board coupled with my GTX 680. Not sure if its the new CPU or the fact that my 680 is not running on PCIe 3.0
I highly recommend the combo on this board though cheers!
i had that bug too whenever i load hwmonitor and cpuz, and sometimes it pops warning that my igp voltage at 0.00V. :3
| Asus Maximus IV Gene-Z Gen3 | Intel Core i7 2600K | Corsair Vengeance LP 2x4GB | Corsair H50 | ATI Radeon HD 5850 | 2x1TB WD Black Caviar | SST60F Modular | Silverstone TJ08B-E |
lets hope asus comes with an updated fixed bios soon
and we remember not to use more then 1 monitor program at once
Just to let everyone know that I updated from 0403 using the bios utility and everything went smooth. No issues detected after 4 days. I'm using a 2500k
i'm having the same issue as peabrains.
After updating the bios to the latest 3203 successfully and resetting the defaults I have found an issue with my system. If I change the AI overclock tuner from automatic to XMP which sets my ram to 1600mhz, my Vcore also gets set to 1.48v and stays at that level (does not fluctuate). The Vcore voltage stays at that level even after changing the AI overclock tuner back to automatic. The voltage will only go back to normal if I reset the BIOS. I have checked the Vcore reading in the BIOS, with Asus AI suite 2 and CPUz and all report the same reading. I did not have this issues with BIOS version 0402. I updated from the BIOS utill.
Board Rev 1.xx
Memory - Kinston HyperX - KHX1600C9D3B1K2/4GX - 8GB total
just set the vcore on manual to 1.25v that should do the trick... 3203 has bugs... im experiencing that bug too..
i7-2600k I Maximus IV Gene-Z/Gen3 I Noctua NH-U12P SE2 I 4x4Gb 1600 G.Skill RipjawsX I 500Gb Seagate Barracuda, 2x500Gb WD Caviar Blue, 1TB WD Caviar Green I Powercolor HD 7870 PCS+ I XFX 650W XXX Edition I Aerocool Rs-9 Devil Red