Im currently having an issue with my Rive, everything works fine except whenever on start-up when it load to the screen where u hit enter / delete to enter the bios it sits there for a couple of minutes, is there any way to make it faster?
Im currently having an issue with my Rive, everything works fine except whenever on start-up when it load to the screen where u hit enter / delete to enter the bios it sits there for a couple of minutes, is there any way to make it faster?
Do you by any chance have some USB devices connected to your system, if so could you list them all.
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
Only usb devices connected would be my mouse and keyboard
Hmm that is odd.
Please go into the bios and disable the SATA ports that you are not using. I assume you are using the Intel ports only?
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
OK Ive disabled the ports that im not currently using, it makes it so the bios screen only appears once, instead of twice, but its still taking like a min sitting at that screen before it enters the bios, or loads into windows
Last edited by Fantic; 05-12-2012 at 02:15 PM.
Could you please reflash your BIOS - to the same bios version that you are using now is fine. Just wonder if there is a bit of corrupted code or something like that which is causing the inordinately long delay.
Before you do begin the flash remember to F5 to restore defaults, and please also flash BIOS only using the EZFlash2 tool in BIOS.
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
sadly does nothing, it still just sit on the asus rog screen then after a minute or so it'll enter the bios if u hit enter or delete, or boot into windows, this is frustrating
It is just nuts. 60sec is a long time.
OK I will pull out my RIVE board and see what is my time
post what BIOS version and cpu you are using (if you have already done so forgive me not remembering)
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
Bios version 1305, and 3930k
ok i get the samething but only when i try a new oc with my ripjawsZ and the oc is not solid fails,and then when restarting system it takes a long time to access bios when it's stuk for a while in the red asus screen and it is due to the memory training differences the system is adjusting to safe defaults.So do u have ur memory timings off,did u play with it or did u play with oc of a cpu frequency? cuz it sounds like the system is trying to adopt to safe settings. especially i c that u have 32gb of memory i supose 4x8 which is tuff on imc,try 1 stik of ram and reset cmos and try with 1 stik of ram and see if theres any difference