What temperature sensors/thermocouples are people using on this board?
You know, the ones you connect that can then be linked to controlling the speed of certain fans.
A link to where you can buy them would be great.
Rampage IV Extreme | i7 3930k c1 | 2xAsus DCUIITop GTX 680 Sli | 16G Corsair Vengeance 1600 C9 | OCZ RevoDrive 3 X2 PCI-Express SSD 240GB | 4xWD 500G RAID 1+0 on onboard Intel controller | 4xWD 3TB RAID 5 and 4xWD 1TB RAID5 on HighPoint RocketRAID 2720SGL | AVerTV Duo Hybrid Tv Card | Corsair HX-850 PSU | Corsair Obsidian 800D
normal sensors ( 2 pins )
heres a site ( uk site ) and a pic of it.
http://www.aquatuning.co.uk/product_...t-50K-Ohm.html
CPU: i5-3570K | MB: M5F | Mem: 16GB dominator platinum | GPU: 2x GTX560 Ti TOP | SSD: 3 x OCZ 120gb | PSU: Fractal 1000W | CPU cooling: internal water | Monitor: LG 47" ( main ( tv ) ), acer 24" s242hl
Wire K-Type thermocouple • Temperature range of 0°C to 250°C enter that search term into google shopping for Aus mate.
n37cb.jpg
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
oh my baad, go whit hiviz's on that ( was doing the lookup at 2am so was overtired sorry )
CPU: i5-3570K | MB: M5F | Mem: 16GB dominator platinum | GPU: 2x GTX560 Ti TOP | SSD: 3 x OCZ 120gb | PSU: Fractal 1000W | CPU cooling: internal water | Monitor: LG 47" ( main ( tv ) ), acer 24" s242hl
Thank you very much HighViz, extremely helpful as always.
Rampage IV Extreme | i7 3930k c1 | 2xAsus DCUIITop GTX 680 Sli | 16G Corsair Vengeance 1600 C9 | OCZ RevoDrive 3 X2 PCI-Express SSD 240GB | 4xWD 500G RAID 1+0 on onboard Intel controller | 4xWD 3TB RAID 5 and 4xWD 1TB RAID5 on HighPoint RocketRAID 2720SGL | AVerTV Duo Hybrid Tv Card | Corsair HX-850 PSU | Corsair Obsidian 800D
Posting Permissions
Reply With Quote
