+ Reply to Thread
Results 1 to 9 of 9

Thread: Bios doesn't show USB drive as in boot menu

  1. #1
    New ROGer Randomuser +10
    Join Date
    May 2012
    Posts
    4

    Bios doesn't show USB drive as in boot menu

    Hello,

    I'm an an owner of a G73J and I wanted to get rid of VSOD so I followed the article posted in this forum.
    Unfortunately I'm stuck at the part where I need to boot from USB to update the vbios.
    I have a bios version 2.11 and it only shows me hard-disk or cd-rom as options for booting.

    Please help. How can I fix the bios so it will use my USB as a boot drive? Or is there some alternative?

    Thanks.

  2. #2
    ROG Guru: Gold Belt dstrakele +75 dstrakele's Avatar
    Join Date
    Sep 2011
    Location
    USA
    Posts
    4,437

    Did you follow the procedure to make the flash drive bootable? If not, the BIOS ain't gonna list it in the Boot Device section.

    Alternatively, have you tried a different flash drive or USB port?

    I think you may also need to be at BIOS 213, but I'm unsure. Hopefully someone more familiar with the vbios update procedure could weigh-in here...
    Last edited by dstrakele; 05-19-2012 at 07:32 PM.
    G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

  3. #3
    New ROGer Randomuser +10
    Join Date
    May 2012
    Posts
    4

    Yes I have. Done it to the letter.

  4. #4
    ROG Guru: Gold Belt dstrakele +75 dstrakele's Avatar
    Join Date
    Sep 2011
    Location
    USA
    Posts
    4,437

    I added some additional text to my previous post that you may have missed.
    G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

  5. #5
    New ROGer Randomuser +10
    Join Date
    May 2012
    Posts
    4

    Plunging the USB stick in other ports doesn't help.
    I fear risking BIOS updating.

    On a sidenote, when trying to create a new boot drive all it lets me do is pick between the two hard disks.

  6. #6
    ROG Guru: Gold Belt dstrakele +75 dstrakele's Avatar
    Join Date
    Sep 2011
    Location
    USA
    Posts
    4,437

    I've seen another thread where a user couldn't get his flash drive detected as a boot device when trying to install Windows. He tried another flash drive and had no problems.

    Alternatively, you could start from scratch by reformatting the flash drive with FAT32. Does Windows recognize the flash drive and the files on it when you plug it in?

    If the device is bootable, it should appear in the Boot Devices list. My Android phone shows up there when I plug it in.

    I realize you may fear BIOS updating, but a specific BIOS version may be a requirement for the vbios update procedure to suceed.

    EDIT: I checked and see BIOS 211 or later is recommended, so you're OK there.
    Last edited by dstrakele; 05-19-2012 at 08:44 PM.
    G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

  7. #7
    New ROGer Randomuser +10
    Join Date
    May 2012
    Posts
    4

    Thanks a lot mate.

    After your probing I started having doubts so I trying making the bootable flash drive again.
    I noticed in the HP USB program that the drive is named 0.00 (for some reason)
    I found this in the BIOS as a boot option (it was there before but I completely overlooked it, because I looked for something related to USB).

    Booted it. Update vbios.
    Now Ill update drivers and hope VSOD will be a forgotten memory.

    Again thank you.

  8. #8
    ROG Guru: Gold Belt dstrakele +75 dstrakele's Avatar
    Join Date
    Sep 2011
    Location
    USA
    Posts
    4,437

    Well, I always leave probing to the aliens, but I'm glad you got it working!
    ;>{)>

    Your post about the drive name 0.00 will help others that may experience the same problem.
    G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

  9. #9
    New ROGer Techsavie +10
    Join Date
    Aug 2013
    Posts
    1

    USB boot steps asus q300

    http://techshoptoday.blogspot.com/20...-usb-boot.html

    so I needed the answer to the question and now a straight answer exists so far for this model. So here gos.

    First turn on the machine while holding down the "del" key. this will get you into the bios. Then go over to the security tab, and disable "secure boot" and any other related security that you should assume you really don't need. Then finally go to the boot options tab, and enable "CSM" (Compatibility System Module). Now save and exit. Shut off the machine. Plug in your usb bootable drive. Now hold the "esc" key as you power on the machine and the boot device option screen will appear, and your usb drive should now be able to be selected and booted from.

    this may or may not work for other models, but for some of the new machines with windows 8, this should apply accross the board.

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts