just bought some new corsair dominator gt ram that can use or supports xmp...how do i change this in my bios for the ram to configure the settings automaticaly
Reset Bios F5 to load defaults, F10 to save. Back into Bios Ai Overclock Tuner change to XMP. F10 to save. Once restarted XMP should be set. I would then make sure the correct voltages for your RAM are set so voltage to either 1.5v or 1.65. If they are not, set these save and your good to go.
Intel 3930K 5.5ghz+, DDR2600 , 3570K ,3770K
ASUS RIVE, MVG,MVF,MVE.MIVE,MIVG -EZ
G.Skill RipjawZ,PI and Trident X
ASUS 7970, GTX580,570,470,460 etc etc
Antec HCP 1200w x 2 and Coolermaster 1200w
http://www.hwbot.org/user/8_pack/
The GB Bencher. http://www.team-greatbritain.com/team-gb-members/
Proud to be an ASUS power user!!!
It is a real good idea to download memtest (Ver 4.2 USB version is great) and test your memory before you even post to OS. Saves a whole heap of problems later in the process.
3 series MIVE, MIVG BIOS FLASH GUIDE
RAID GUIDE * Memtest86+ GUIDE * CAP GUIDE * USB BIOS Flahsback GUIDE * Win8 Rampage Install
ONLY IF 2003 BIOS or NEWER
To Flash back to 1xxx.ROM, Rename 1xxx.rom to ERALL.ROM and Use USB Flashback
Posting Permissions
Reply With Quote