Probably Not Stable but finally broke 5000 MHz

[Roadking]

I have some tweaking to do but it was extremely hard to get it to post so i doubt Ill be able to get her stable

5017 MHz.jpg

[oldbrave]

Congrats on your OC it's a good feeling when you can boot it and see that 5000Mhz range when it hit's windows.
Your paste doesn't say what your cpu/nb or ht speeds are so let me suggest a couple of things that may help with stability.
cpu/nb = 2600Mhz range @ 1.3v
ht = same as cpu/nb @ default + .0250v
Your temps seem fine so you might try and up your vcore to 1.5v.
I really got lucky when I got my chip, it went to 5Gb right off the bat, the only thing that took any time at all was trying to figure out which combination of buss and multiplier was easy on the memory and the cpu was happy with.
Once again , WELL DONE !

[Roadking]

@ oldbrave, Thanks
As much as I'd like to keep fidllin with this I have to go to work in the morning an its getting late currently on the same time as you. Ive been shooting for this for months but wasnt able to acheive until I went under water. Waited a few weeks to try this, wanted to make sure TIM cured. Will follow your advice tomorrow evening. You are right even if it aint stable it sure feels good to get it to post.

[HiVizMan]

Well done my friend.

[Roadking]

Congrats on your OC it's a good feeling when you can boot it and see that 5000Mhz range when it hit's windows.
Your paste doesn't say what your cpu/nb or ht speeds are so let me suggest a couple of things that may help with stability.
cpu/nb = 2600Mhz range @ 1.3v
ht = same as cpu/nb @ default + .0250v
Your temps seem fine so you might try and up your vcore to 1.5v.
I really got lucky when I got my chip, it went to 5Gb right off the bat, the only thing that took any time at all was trying to figure out which combination of buss and multiplier was easy on the memory and the cpu was happy with.
Once again , WELL DONE !

Used your suggestions and got 1 hour stable with AIDA 64 temps look pretty good, PRIME Next.

1 hr AIDA Stability 5017 MHz.jpg

[oldbrave]

That's great, I'm glad I could be of some small bit of help towards getting your system stable.
Just keep tweaking it, seems like you've got the majority of the work done, now it just the small adjustments.
I hope you'll keep us in the loop and if you need any help, well that's what we're here for.

[Roadking]

Thanks for the support OB and HVM.