memory problem

[cimbri]

Hi im from bosnia (small country )and recently i bought formula IV crosshair with amd 1090T, how ever i got 2x2 gb memory, now i cant find upgrade i wanted to move to 3x4 or 4x4 gb, since as i mentioned small country and do not have good selection of memory,r, also i check compatibility memory list from asus and non of mentioned memory can be find here, please if you can advice me to what to search fo

[Arne Saknussemm]

That's a dual channel board so best to stick with multiples of 2. Max is 16GB. The qvl list is not exhaustive. It is a list of kits asus tested on the board. If you go to Manufacturers websites you should be able to find if they have tested their RAM on the board. What frequency did you want to run?

[cimbri]

That's a dual channel board so best to stick with multiples of 2. Max is 16GB. The qvl list is not exhaustive. It is a list of kits asus tested on the board. If you go to Manufacturers websites you should be able to find if they have tested their RAM on the board. What frequency did you want to run?

any i find in this country, but just to try to fill up to 12 or 16gb. i cant be to picky

this is what i can find as set

Kingston
Type DDR3
Model KHX1600C9D3K4/16GX
Capacity 16GB (4x4GB)
Speed 1600MHz
Latency CL9


Patriot
Type DDR3
Model PGQ316G1600ELQK
Capacity 16GB
Speed 1600Mhz
Latency CL9
Enhanced Latency (9-9-9-24)
Voltage: 1.6V
XMP 1.3 Ready

[Arne Saknussemm]

Patriot
Type DDR3
Model PGQ316G1600ELQK
Capacity 16GB
Speed 1600Mhz
Latency CL9
Enhanced Latency (9-9-9-24)
Voltage: 1.6V
XMP 1.3 Ready

From those two....I would go with this. It is a quad channel kit so will give you less problems filling up all four slots. And it is xmp 1.3 and runs at 1.6v 1600. the other needs 1.65v to do the same.