Asus Maximus V Ai Suite II Problems

[maximine]

Hello guys, can somebody Help me with this erros ? I have tryed install/reinstall this program..Also EPU keeps crashing on windows boot(is disabled in BIOS). I have attached a screen regarding the error...Ai Suite II is the lateste version instaled from Asus Mainbord page.I have managed to setup all the fun`s once after finishing instaling the AI Suite II, after that never can go inside it.

Version AISuite_II_V10229_MA_V_G_XPWin7 is instaled.

[8 Pack]

I had this.

Uninstall the entire Suite.

Install the latest Intel management driver, then reinstall the Aisuite.

[maximine]

Hello.Thanks for your sugestion but the problem is still there with reinstaling the IME..
I have unninstaled the Ai Suite, also IME was there, unninstaled this to...Rebooted, cleaned the registryes, instaled IME (MEI_allOS_8.0.10.1464_PV_5M) and after AI Suite II..

Nope, I cant even open AI Suite II.Sometimes I can go inside Turbo EVo, but in the fan section not, the same errors are there.

[maximine]

Updated from fan expert V1.00.13 to V 1.00.15 and everything`s fine...Please update also Maximus V Gene utilities to the latest version, I took from other MB newer versions.

[nadof1]

linky
http://dlcdnet.asus.com/pub/ASUS/mis...rt2_V10015.zip

[maximine]

The same problem is back also with version V15 at the end...I dont know anything what to do anymore..have tryed what 8pack told me, nothing...have updated the fan expert II to new version, problem is back...What should I try anymore ?

[8 Pack]

Do you actually use Fan expert ?? If you dont, dont bother installing it at all.

On a side topic those DIMMS you have are hynix based so should go 9-11-10- ae they stable with the timings you have here????

[maximine]

Hello my friend...if I understood your question,memory is fully stable..The kit is Corsair Vengeance 1866, 1.5v.They run on M5G at 2133Mhz, 9-11-9-24 T1 with 1.63v..I have tryed also 2200Mhz, but not tested the stability.
In other manner, the problem from fan expert II is a compatibility issue with the latest MSI Afterburner & KIS2012.When I have closed it, everything runs ok.I have to check out the autostart option of the Afterburner, in this case I can acces fan expert.After that I can open MSI

[8 Pack]

Hmmmmmm typical a clash in software. One or the other running then I guess.