Hey guys, this is my first build and I haven't been able to get my motherboard to post for a week now. I have the rampage IV extreme and after finishing the build and trying to start up the led # display on the monitor posted 65 telling me there is an issue with my cpu. I expected this as I have the i7-3820, which needs the updated bios in order to work. I proceeded with flashing the BIOS with a FAT32 formatted usb with the latest BIOS which I renamed accordingly and saved as .ROM. Anyways when trying to flash the bios I held down the ROG connect button which began to flash for a few seconds, but then suddenly stopped. I tried this again and again, but it would keep cutting out after a few seconds of flashing. I contacted ASUS and they recommended I unplug the psu and change the jumper cables from 1 and 2 to 2 and 3. After doing this the same thing happened and the button just stopped flashing after several seconds. Any advice or help is greatly appreciated!!!! I really want to get my computer up and running.