Hi there,and welcome to the forum,sorry to say,but your cpu is not supported on the board without the latest 3### series bios,but you are in luck,there is a workaround,follow my instructions in the thread below.
Originally Posted by moorhen2
Hi there,the simple answer is yes you can,using the ROG Connect procedure,ie,download the latest bios,using a memory stick formated to Fat32,place the bios file on it,rename it to M4EZ.ROM,with the board powered down,but still power to it,place the memory stick in the ROG Connect port,press the ROG Connect button next to it for several seconds then release,the LED light next to the first bios chip will start blinking,wait for this to stop blinking,it can take a few minutes,then your good to go.It is called flashing blind,you dont need a cpu installed.Hope this helps.
Here is the port you need to use.
ASUS CROSSHAIR V FORMULA-Z
AMD FX 8350 (1252)
INTEL CORE I7 2600K (3134A867)
ASUS MAXIMUS IV EXTREME-Z (0002)
OCZ VERTEX 3 120 SSD
GIGABYTE 890FXA UD7 REV 2.1 (F3)
GIGABYTE 890FXA UD7 REV 2.0 (F3)
VARIOUS AMD CPU's
8 GIG G-SKILL SNIPER LOW VOLTAGE 1600
4 GIG G-SKILL RIPJAWS X 2133 C9
8 GIG CORSAIR VENGEANCE 1600 C8 (HYNIX)
CORSAIR OBSIDIAN 800D
CORSAIR HX1000W PSU
2X RADEON HD6970'S XFIRE
4X SAMSUNG F3 1T HDD's 2X RAID 0
CUSTOM WATERCOOLING