It should bump down at idle to save power. Check it with something running on the GPU.
- Today's Posts
- Mark Forums Read
-
Settings & Functions
- Settings
- My Profile
- Today's Posts
- Community
- Forum Actions
- Quick Links
It should bump down at idle to save power. Check it with something running on the GPU.
● ASUS Maximus IV GENE-Z ● Intel 2600K ● DangerDen cooling ● 8GB G.Skill Trident ●
● ASUS GTX670 ● Patriot PyroSE SSD ● Antec Signature 650 PSU ● Antec Mini P180 ● [ ASUS G73JH ] ●
Folding@Home - Join us!
While running diablo, this is displayed.
GPUz3.jpg
I'd assume all is ok.
Due to the fact I was unable to open my nVidia control panel, I decided to reinstall EVERYTHING.
I now have a fresh Windows 7 Pro x64 installation. All the drivers/software from the motherboard support CD are installed, as well as the nVidia driver 301.42 for the GTX570 and GPUz (DL'd from previously linked url).
The main problem seems to be this:
Either of the 2 cards installed in slot = Stuff works, card gets detected (speed: x8 native in BIOS)
2 cards installed = Black screen (This is with both the SLI bridge connected and disconnected).
Posting Permissions
Reply With Quote