? on an (2)ASUS GTX 670 DC II Top setup in SLI

[The Veterant]

Hi to everyone here, I just received my 2nd card from NewEgg today and I'm in the process to setup both card in a SLI setup on my new setup rip Asus P8Z77-V Premium. And my 1st. ? is do I have to or their is any different on using 1 or 2 SLI ribbon bridge?. And the 2nd. ? is I have a 3way SLI bridge board can I use that one as well for the 2way SLI?. thanks in advance for the promptly response, do to NVidias' forum been hack I have to post this ? here

[Dark]

Depends if its a short sli card or long one if the ribbon fits then its fine n na dont try putting the 3 way on two cards that'll br daft

[The Veterant]

okay go back to the first ?, I have one short flex ribbon and one long one. see on my P8Z77 Premium I'm going to set on card on slot 1, then the other on slot 3 and I'm going to have to use the long ribbon single cable or the 3way SLI board that I'm going to be using both far ends of the board, which one do U advice me to use better, thanks.

[HiVizMan]

Only use one SLI bridge.

[The Veterant]

All ready then, Thanks from the other part of the word the caribbean

[HiVizMan]

All ready then, Thanks from the other part of the word the caribbean

I hate you man living in the Caribbean, I have not seen the sun more than three time in three months now, it rains or is overcast every day. And I mean every day all day.

Bet you have had a few days of sun shine lately. Can I come visit .... please.

[The Veterant]

hey I know how U feel cause when I was station in Germany I now how it feel been for moths without seen the cloudy most of the time and when it not raining I got use to that for a while, then they send me to Texas and everything change. Here most of time is been sunny and shmoggy.

[The Veterant]

Hey guys I have another ? for someone helps pls. I just got done installing my 2way SLI GTX 670 DC II Top: and my ? is as follow.
Do I have to uninstall the driver before installing the other card, then reinstall the driver after done installing the 2nd card for the driver recoqnize the LSI setup? Thanks in advance guys.

[HiVizMan]

No problem for the questions. That is what ROG forum is here for.

I am going to link you to my SLi set up guide I put together a while ago it might help you.

But short answer is put the cards in (you have done this) and if your graphic driver does not pick them up automatically when you boot into Win7 then just do a quick install of the driver again. But it is best to follow the steps I laid out in the guide.

http://rog.asus.com/51612011/graphic...x-setup-guide/

[The Veterant]

HiVizMan, thanks much guy U been very helpful person, this guide clear me a lot of doubts that I had, I wish I could be there 4 the Olimpic openning but I guess I have to watch them on TV, thanks guy at less I know I have found a friend.

Hey HiVizMan by the way if U want I can send U my Battlefield ID to see if any time we can play together guy, I'm not to good but I can get by