Just arrived on Station-Drivers
http://www.station-drivers.com/page/intel%20raid.htm
Just arrived on Station-Drivers
http://www.station-drivers.com/page/intel%20raid.htm
i7-3930k @ 4666 W/C with EK Supremacy 1.34v - 24/7
Rampage IV Extreme w/ EK blocks ¦ 32GB G-Skill 2133 @ 2212
EVGA GTX Titan 6GB w/ EK Original CSQ block @ 1176 boost / 6628 mem
Intel 520 240GB x 2 RAID 0 (Windows 8) ¦ Seagate 2TB x 2 RAID 1 (Data)
Corsair Force3 120GB (OSX Mountain Lion) ¦ Corsair HX1050 PSU
Cooling - Dual Loops with BlackICE360 / GT1850 / Laing D5 on each
Did you try them out? Any TRIM support for RAID0? Don't see any official changelog in the archive. I had to remove an Atheros based WiFi card (latest drivers from atheros.cz) from my system because I kept getting freezes/hangs when I switched to RAID0. RAID0 w/o the Atheros card has been stable.
I'll give them a shot in the next few days, most likely.
i7-3930k @ 4666 W/C with EK Supremacy 1.34v - 24/7
Rampage IV Extreme w/ EK blocks ¦ 32GB G-Skill 2133 @ 2212
EVGA GTX Titan 6GB w/ EK Original CSQ block @ 1176 boost / 6628 mem
Intel 520 240GB x 2 RAID 0 (Windows 8) ¦ Seagate 2TB x 2 RAID 1 (Data)
Corsair Force3 120GB (OSX Mountain Lion) ¦ Corsair HX1050 PSU
Cooling - Dual Loops with BlackICE360 / GT1850 / Laing D5 on each
Installed these this morning and S.M.A.R.T. is now reporting. Didn't have time to check if TRIM was working over RAID, but the Intel SSD Toolbox is now finally working.![]()
I don't run SSD, but, installed they have not caused any issues and I can now work in Safe Mode
Windows 7 Ultimate x64 SP1
ASUS Rampage IV EXTREME/BF3 motherboard (BIOS 1404 modified Intel ROM 3.1.0.2101)
Intel Core i7 3960X CPU @ 3.3G (stock)
Zalman CNPS9900MAX-B Headsink
32G (8*4) Corsair CMT16GX3M4X2133C9 Dominator GT 16GB Quad Channel memory at 2133Mz (xmp profile)
Seasonic ATX 1000W 80PLUS Platinum Power Supply
LG GGW-H20L Blu-ray writer
2*Western Digital Velociraptor 500GB (64mb cache) in RAID0 on the x79 at SATA 3
2*Western Digital Velociraptor 1000GB (64mb cache) (1Tb) on the x79 at SATA 2
2*XFX FX-797A-TNBC Radeon HD7970 OC Black Edition video cards in crossfireX at GEN 3
Auzentech X-Fi Hometheater HD Audio Card at GEN 2
Silverstone Temjin TJ10B-W NVIDIA Edition Case
TJ10 USB 3 upgrade kit
1*Noctua NF-S12B FLX 120mm, 4*Noctua NF-P12 120mm Chassis Fans
Asus PA246Q, 24.1" Widescreen P-IPS Monitor
Canon MP560 series Printer
Logitech G9x Laser Mouse
SteelSeries 6G V2 Mechanical Keyboard
APC Smart-UPS SMT2200
Last edited by RickROG; 07-23-2012 at 03:17 AM.
Would this driver be the one for Rampage IV Extreme, if so why does ASUS's download section show one as old as 3.0.0.3011 I'm very confused by this RSTe/RST stuff see some people talking about RST 11.X.X.XXXX versions and then others about 3.X.X.XXXX versions. What to use?
Phobya Bench Table / Rampage IV Extreme / i7-3930K @4.6GHz offset -0.015 / 16GB Corsair Dominator Platinum 2133 CMD16GX3M4A2133C9
2x ASUS GTX Titan in SLI / ASUS Xonar Essence STX / 2x OCZ Vertex 3 256GB 2x WD Caviar Black 500GB
Custom loop: EK Supreme HF Full Ni / 2x EK-FC TITAN XXL Edition / 2x EK Coolstream XTX 360 / EK D5 X-Top CSQ Acetal
Alphacool D5 Vario / EK-Bay Spin Res
Dell U2711
Well i'll be using RAID for my storage drives and a single SSD for OS for now will be adding a second SSD in RAID 0 in the future
Intel SSD Toolbox SSD Optimizer "The selected drive is part of a RAID array. This feature is not supported on a RAID member."Oh well, at least it's working again.
![]()
Intel 3930k @ 4.6GHz - 1.37V
ASUS Rampage IV Extreme BIOS 1404
EVGA GTX 680 SC Signature 2
Samsung DDR3-1600 @ 1866 - 9-9-9-24 1T 1.35V
Intel 520 180GB
2 x Intel 320 120GB
PC Power & Cooling 950
Cooler Master HAF XM