Rampage 4 Extreme won't boot.

[WatchMan]

Here's what I've tried so far, did the CMOS clear and left over night,switched bios, took out cou to see if it was in there right (I'm pretty sure it is now). All these with the sme result. I also hooked up my cou cooler to one of the chassis fan headers and it's working great. I did notice that the chipset fan seemed to be running full power the whole time. I also checked the 4 pin ATX power, by getting another pc and putting it's 4 pin in mine and then try to turn both on, no result so it's not my powersupply.

[HiVizMan]

You are still not getting anything on the two LED Q-code posters either I take it. If that is the case, time to RMA the motherboard sadly.

[WatchMan]

Are those 2 lights in between the 24 pin and the start/reset button? Because I had 2 leds lit up there but didn't think they were important.

[WatchMan]

My phone isn't letting me edit but I mean the ones next to the start and reset button (right side)

[HiVizMan]

Look in the corner next to the power start and reset button.

[WatchMan]

I'm not home right now but I know there were 2 leds lit to the right of the start and reset button.

[WatchMan]

Just got home and checked it:
The 3rd light is on (which is DRAM_AB I think)
and VCore one seem to be on.

I'll make a picture if you don't follow.

Edit: I just checked out my 24 pin and there is one connector missing...? Don't know if this is normal?
Edit 2: I just pulled out the cpu, no bend pins or anything. Tried both RAM sticks, no difference. Tried pulling out all harddrives, no result. I think my cpu is fried.
Edit 3: Also tried pulling out VGA, still no difference.

[HiVizMan]

Not a problem. Please tell me what is the sequence of letters and numbers on the 2 LED Q-code poster, if anything.

[WatchMan]

It's 00. And it hasn't changed ever.

[HiVizMan]

That normally indicates that your CPU is dead. Let us hope your CPU is not gone to silicone heaven.