I tried this and it would get to the windows startup logo (before login) and then reset. I increased the voltage by 2 notches each time eventually getting up to 0.1V before I finally set all the voltages in the CPU voltage section as below. The settings were a complete guess (based roughly on the defaults). So my questions now are:
Originally Posted by HiVizMan
1. is there a better way of working out these voltages (is there somewhere I can find out what they do and how to work out what they should be)?
2. Should I consider enabling LLC (and if so what settings should I use)?
3. Is there a voltage offset overclocking guide anywhere I can follow instead of wasting your time ;-) ?
Thanks for your help ...
Settings are now:
CPU Voltage Control: Offset --> Offset
CPU Voltage: 0.05 --> 0.05
CPU PLL Voltage: Auto --> 1.80
QPI/DRAM Voltage: 1.275 --> 1.27500
IOH Voltage: Auto --> 1.14
IOH PCIE Voltage: Auto --> 1.5
ICH Voltage: Auto --> 1.2
ICH PCIE Voltage: Auto --> 1.5
DRAM Bus Voltage: 1.64 --> 1.64