cancel
Showing results for 
Search instead for 
Did you mean: 

Intel MEI & ME Version 8.1.10.1300 & 8.1.10.1286 (driver and FW)

nikolator
Level 10
Just found http://www.station-drivers.com/forum/viewtopic.php?f=32&t=4116
Made easy installation of driver ver 8.1.10.1275 and soft and no sucsess of FW...
Any ideas how to jump from version 7... of FW?
191,900 Views
173 REPLIES 173

nikolator
Level 10
another link with instructions for x79
ftp://europe.asrock.com/drivers/Intel/Others/ME_Win8-64_Win8_Win7-64_Win7_Vista64_Vista_XP64_XP(v8.1...

but for me it's too complicated...
this link is dead now, the difference between the previous one was just manual

jezjohnson
Level 10
Looks fairly complicated, hopefully someone has a bit of time on their hands to work this one out! 🙂

tistou77
Level 13
For MEI Driver it's OK, but I have not tested for the firmware, it's complicated?

And I tried to install (.exe), and I got it 3 update, what they correspond?
If I want to manually install

12671

Thanks
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus

Necrosan
Level 12
I was able to successfully update to ME version 8.1.10.1286 by using FITC to save the image for Patsburg X79 (Change number of flash components to 0 for ME only, as Intel instructs) then flash it using "fptw64 -ME -F ME8_X79_HED.bin"

(If you'd like you can make backup of ME region with fptw64 -ME -D backup.bin)

Worked 100% perfect. Make sure you shutdown after you flash (reboot is not enough)

Also, if it wasn't clear by the utility this flash was done inside of Windows, although I'm sure it would work the same if performed from a DOS boot.

12672


Intel(R) MEInfo Version: 8.1.10.1286
Copyright(C) 2005 - 2012, Intel Corporation. All rights reserved.

Intel(R) ME code versions:

BIOS Version: 3010
MEBx Version: Not available
Gbe Version: 1.3
VendorID: 8086
PCH Version: 5
FW Version: 8.1.10.1286
UNS Version: Not Available
LMS Version: Not Available
MEI Driver Version: 8.1.10.1275
Wireless Hardware Version: Not Available
Wireless Driver Version: Not Available

FW Capabilities: 0x00101460

Intel(R) Anti-Theft Technology - PRESENT/ENABLED
Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED

Cryptography Support: Disabled
Last ME reset reason: Power up
Local FWUpdate: Enabled
BIOS Config Lock: Disabled
GbE Config Lock: Disabled
Host Read Access to ME: Enabled
Host Write Access to ME: Enabled
SPI Flash ID #1: EF4017
SPI Flash ID VSCC #1: 20052005
SPI Flash BIOS VSCC: 20052005
BIOS boot State: Post Boot
OEM Id: 00000000-0000-0000-0000-000000000000
Capability Licensing Service: Enabled
OEM Tag: 0x00000000
Localized Language: Unknown
Independent Firmware Recovery: Disabled


Simple flash instructions (Inside Windows x64 using Intel Flash Programming Tool (NOT FWUPDATE!)):
fptw64 -ME -F ME8_X79_HED.bin

Here are links to the two different versions:

Download High-End Desktop Build (Mimics ME settings from stock RIVE ME)

Download Workstation Build (Includes the FW capabilities listed above, not sure if they work on our ...
MB: ASUS Rampage IV Black Edition
CPU: Intel Xeon E5-2697 v2 (Cooled by Corsair H100i w/ Noctua NF-F12 fans)
RAM: 64GB G.SKILL RipjawsZ 1600 (10-10-10-30)
GPU: EVGA GeForce GTX Titan X Hybrid
TV Tuners: 2 * Hauppauge HVR-1800
Case: CoolerMaster Cosmos 2

tistou77
Level 13
Can you explain in detail for FITC, I do not understand how to update, please

In DOS mode, it does not work 😞

Thanks
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus

tistou77 wrote:
Can you explain in detail, I do not understand how to update, please

In DOS mode, it does not work 😞

Thanks


You are likely trying to use the wrong tool.
Re-read my post and do exactly as I instructed. If you do this incorrectly you run the risk of ruining your board.
MB: ASUS Rampage IV Black Edition
CPU: Intel Xeon E5-2697 v2 (Cooled by Corsair H100i w/ Noctua NF-F12 fans)
RAM: 64GB G.SKILL RipjawsZ 1600 (10-10-10-30)
GPU: EVGA GeForce GTX Titan X Hybrid
TV Tuners: 2 * Hauppauge HVR-1800
Case: CoolerMaster Cosmos 2

tistou77
Level 13
That's what I do not understand (which is what is in FITC)

by using FITC to save the image for Patsburg x79 (Change flash region to 0 for ME only, as Intel instructs) then flash it using "fptw64 -ME -F ME_81101286_X79.bin" (outimage being the output file from FITC)


Thanks
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus

tistou77 wrote:
That's what I do not understand (which is what is in FITC)



Thanks


Just follow "Simple Instructions" - the info you quoted is how I generated the valid image for our board and not applicable to those just wanting to update.
MB: ASUS Rampage IV Black Edition
CPU: Intel Xeon E5-2697 v2 (Cooled by Corsair H100i w/ Noctua NF-F12 fans)
RAM: 64GB G.SKILL RipjawsZ 1600 (10-10-10-30)
GPU: EVGA GeForce GTX Titan X Hybrid
TV Tuners: 2 * Hauppauge HVR-1800
Case: CoolerMaster Cosmos 2

tistou77
Level 13
Ok I just use fptw64 and your file .bin?
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus