I got my MB Asus Maximus IV Extreme with the new revision B3.
My setup is;
GTX570 sli x2
Cooler Master 212+
after installing the drivers from the CD I went to the bios to see the version and it was 1204.It's seems to be the last one but after checking there is a new one 1303.I try to setup my configuration with the bios version 1204 and it was pretty difficult but I somehow manged to setup the system to work.The first problem was with dram memory that I coudn't put on the 1 and 2 slot to work, only in the 3 and 4 slot work correctly?????Whatever I decide to let like that until Asus find the solution for this strange issue.My second step was to overclock by using Turbo Evo from Asus Suite 2 and I press button fast so he will lift up to 4.2ghz with recommendate setup.While the system reset by himself I got on the display(top right corner) 58 code???Seems to be some problem wiht the procesor or too high clock???Ok now comes real trouble, I coudn't start the system after resetting 5 times and after unpluging the comp. and pluging again I managed to lift up the system.I left everything on stock setup from the beginning and start linx to see how It's work on stock frequency.The temp. don't go over 64C after 15 minutes, so every is fine.I try with the bios 1303 same problem appears and I don't know what to do....Someone have a good advice what to do???
I'm sorry for my bad English
Ooh I forgot to say when I was in the bios I saw that NF200 had non-constant voltage, sometime going under 0,050V....
Thanks in advance for answering.