12-30-2012 02:06 PM - last edited 3 weeks ago by ROGBot
12-30-2012 03:08 PM
12-30-2012 09:29 PM
01-02-2013 01:02 AM
Sverre wrote:
My RAM (Corsair Dominator 1600MHz) was unstable when I bought the MB. Then after som BIOS updates it was working fine, until I installed 3301. Now slot C2 and D1 doesn't work. I found the CPU overheated when I OC'ed it, but that was a mechanical fault with the water cooling. Now the CPU runs fine, but I can't run the RAM at more than 1333MHz, over that and I get BSOD problems. Since D1 is the first pair with B1 I don't realy know how to install my RAM. Now I have just used all slots excelt D1 (crash) and C2 (not recognised). Unsure what the problem is with the slots. I have taken close up photos and studied them and there's no physical damage. Also, the RAM runs on tri channel now because of the placement. Anyone know how I can place the RAM modules to get quad without using D1 and C2 (I don't need to use all 8 8GB modules, but as many as possible)? Going for some Dominator GT 2133MHz as soon as this problem is solved. I just hope it isn't a physical problem with the MB, it's hell to remove all the components as everything, and I mean everything, in there is water cooled.
Edit: All modules has been tested in slot B1 on over 1600MHz (think I used 2000MHz, but can't remember) an all of them worked. I have also run mem-test on them without problems. They run fine until Windows shuts down the display and load the drivers. Then the BSOD error comes.
12-30-2012 10:22 PM
01-01-2013 02:22 PM
Chino wrote:
Welcome to the ROG boards, MMXMMX.
I'm sorry to have to be the one to tell you this but the Vengeance series from Corsair has been causing a lot of problems on the RIVE. During the last week alone, I've seen like 4 threads about the RIVE having problems with this particular RAM. I can go as far as tell you that 9 out of 10 support threads on the ROG boards about the RIVE freezing, bsoding, etc. been attributed to the the Vengeance series.
12-31-2012 02:06 AM
01-01-2013 04:27 PM
01-01-2013 11:33 PM