how I can configure drr3 1600 in crosshair V

[spitdemo0889]

I have a crosshair V. with dominator 2X4GB (8GB) CMP8GX3M2A1600C8
a phenom II 955 BE but when I put the ddr3 work
1333 no in 1600mhz. how do I put in the 1600MHz to see if I explain in bios i need set the latency

syst spec.

Phenom II 955 BE revC3
crosshair V formula
Corsair dominator 2X4GB (8gb) CMP8GX3M2A1600C8

[Praz]

Are setting the proper voltage for the ram in the UEFI? Has the 955BE ever worked with 1600MHz memory speed before?

[spitdemo0889]

in the UEFI is all in auto explain me to set this.
set a voltage 1.65v ?
set a cas latency 8-8-8-24

[Praz]

The settings are shown in the link below.

http://www.asusrog.com/forums/showth...e-Overclocking

[spitdemo0889]

i see this tuto explain for 2000mhz is same for 1600mhz this values

[Praz]

The second screenshot in the guide shows where you set the memory voltage to 1.65V. - DRAM Voltage

The third screenshot is where you set your memory timing that are spec'd for your ram.

DRAM CAS Latency - 8
DRAM RAS TO CAS Latency - 8
DRAM RAS# PRE Time - 8
DRAM RAS Active Time - 24

[spitdemo0889]

and the cpu set in auto and the other values of dram in auto?

and not press any button in board a go button or OC button?

[Praz]

That is correct, yes.

[spitdemo0889]

for ddr 2000mhz is a same steps as 1600?

[Praz]

Use the settings I posted in post #6.