i have a problem every time i start a game screen goes black or green color don't know what to do
i have test 2 video card a 580 GTX and 560 ti gtx same thing that screen come up so how do i fix this issue ?
Asus Crosshair V
AMD 1090T
G.Skill 8 GB
Ocz Vertex 3 Raid 0
Evga 580 GTX
Could be a GPU or system stability issue.
What GSkill RAM is this? (GSKill 8GB does not tell us much).
What BIOS version are you using?
-Raja
Have you tried a different cable?
Have you tried a different PSU?
__̴ı̴̴̡̡̡ ̡͌l̡̡̡ ̡͌l̡*̡̡ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡͡ ̲|̡̡̡ ̡ ̴̡ı̴̡̡ ̡͌l̡̡̡̡.__
My System Specs @ OCN
Asus Crosshair V, AMD X6 1090T @ 3.6Ghz with Coolit Vantage, 4x G.Skill Flare F3-14400CL7D 7-8-7-24 @ 1800 with OCZ XTC Ram Cooler, XFX 5870 with AC Extreme 5870 + VRM-R3
2x Corsair Force 115GB Raid 0 + WD Green 1TB + 1.5TB + Kingston SSD 30GB, Corsair HX750, Dell ST2410, HAF X, Asus Xonar STX, Superlux 668B, Zalman MC-1, Edifier S330D
G.Skill F3-17000CL9D-8GBXLD i also try other 2 GB ram F3-12800CL7D-4GBXM. i have switch video card between 580 GTX and 560 GTX.
i have try 3DMARK 11 and it does crash at start also my bios 506 and i even clean CMOS still the same
Asus Crosshair V
AMD 1090T
G.Skill 8 GB
Ocz Vertex 3 Raid 0
Evga 580 GTX
CorSair HX1000
i just took whole system apart but still the same issue
Is your OS install on that RAID array?
-Raja
Yes it is.Originally Posted by Raja@ASUS
i just did clean install of windows 7 on 1 tb drive and i did run 3DMark11 and screen goes like picture.
Do you still have the raid array active as a secondary drive?
Try using a different PCIe slot for the GPU and see if the issue persists.
Set memory parameters:
Command Rate 2T
Read to Read Timing 5 clocks
Voltages:
Set VDIMM manually for the specified voltage of the DIMMs
Set CPU/NB Voltage to 1.20V
Ensure system is at stock.
-Raja
I took off raid. After installing new OS on 1 tb drive I did run 3dmark11 and screen come up like alway. but after 3dmark11 was done screen when back to normal.
Posting Permissions
Reply With Quote