Now I get a BSOD with my CH V

[Area 66]

Can you tell me what this is; I reboot and BSOD , I remove the OC and reset the BIOS, I have to use only 2 sticks

[Praz]

I'd be looking at a possible faulty memory stick or a user configuration setting error. Until pushing the IMC to the extreme or running the memory out of spec 16GB is pretty much effortless on the C5F.

Prime95 running - Showing amount of memory used
click for larger image



Prime95 stopped - Showing time run and number of tests
click for larger image

[Area 66]

Give me a break , I have those 16 gb install on my MSI board since last September, 0 issues.

[Praz]

Give me a break with all that prime95 crap. I have those 16 gb install on my MSI board since last September, 0 issues. can you read .

Good luck then.

[Area 66]

Sorry for the bad mood Praz, the problem is that I just want a stable board with 16 gb of ram at stock, no OC , and it's look to me that I will have to boost the voltage to achieve it, now I start a tread to find the best ram to do it. But I will use this board later as WS , only after I have fished to play little bit but with 2 sticks of RAM.

[Area 66]

I wake up at 5 am this morning read 5 times the stiky of Raja on CH V OC and I install a beeffy DH-14 and cranck the OC to 3,6 , with this time 1,6 volts on the RAM, I'm folding with it now, if everything go fine I will try to lower the Dram volts. Of course I disable this turbo stuff as it was again rising the core at 1,5v before I fold. [IMG]

http://i554.photobucket.com/albums/jj432/dataxpert/dh-14d.jpg[/IMG]

[vvulture]

Give me a break , I have those 16 gb install on my MSI board since last September, 0 issues.

Dude, in the world of electronics, ANYTHING can develop a fault, anytime, anywhere.... no exceptions !

[sb0326]

MarkedOne,

I had a similar problem with my 16gb of Corsair Vengeance memory. When I switched to one of the beta bios that Raja had posted for some reason it screwed up my default memory timings. I literally had to load an old bios, copy my timings down, load new bios and manually enter the timings. Hope this helps..

-Shannon