cancel
Showing results for 
Search instead for 
Did you mean: 

MemTweakIt not working M4F with Bios 4403

simonmaltby
Level 7
Installed my machine today using the latest Bios 4403 and drivers from Asus site.

MEI_Win7_8_VER9001287
Intel_Chipset_VistaWin7_8_VER9321014

and MemTweakIt

MemTweakIt_Win7_8_VER20001

Installs ok but when I run it I just get the About page. No other tabs and nothing to click on.
21,764 Views
18 REPLIES 18

Chino wrote:
What is the exact model of your motherboard?


Rampage IV Formula

Yes same result.
I should point out that i'm using an Ivy-E processor

Everything else is working including AI Suite II (Although I can't get CPU Multiplier to enable in TurboV)

simonmaltby wrote:
Yes same result.
I should point out that i'm using an Ivy-E processor

That's a very important piece of information, mate. Thanks for pointing it out.

Do me a favor. Please list your complete system specs as detailed as possible for me. I'll see if I can find someone from Asus to look into this issue. Thanks.

simonmaltby
Level 7
I have sent you a PM with my details.

HiVizMan
Level 40
Hello Simon you still running your Super Pi league over at OCUK?

Let me know if you get sorted mate and if not I will see what we can do.
To help us help you - please provide as much information about your system and the problem as possible.

simonmaltby
Level 7
No still not sorted mate.

System specs are
Asus Rampage IV Formula
Retail 4930K CPU
16GB G.Skill TridentX 2666

Have tried windows 8 and windows 7 clean installs
Have tried both the official and Kingpin forum bioses but in each case I cannot get anything other than the About page in memTweakIt and have no CPU Multiplier / Turbo ratio in AI Suite.

Any help would be greatly appreciated.

HiVizMan
Level 40
OK no worries I will pull the stuff and see if I can duplicate. Failing that I will email you the TurboV that I know works. Memset I can not confirm as working just yet. But I assume it is, since it worked for Ivy.
To help us help you - please provide as much information about your system and the problem as possible.