Crosshair V memory stability Data Base:

[Kipper]

Lets try to get a Memory Stability Data Base going here on the forum.

I will start it off with the memory that I have found to be stable. If everyone who would like to contribute would just post their stable memory results I will keep the data base updated in this post.

Hopefully this will be of assistance for those that are going to purchase the motherboard or want to upgrade their memory.



User: Kipper

Memory: Corsair Vengeance 8GB Kit (2x4)
Part No: CMZ8GX3M2A1600C8 1600MHz
Timings: 8-8-8-24
Volt: 1.5
CPU used: 1100T

Memory: G-Skill 4GB Kit (2x2)
Part No: F3-1700Cl8D-4GBXMD 2133MHz
Timings: 8-9-8-24
Volt: 1.65
CPU used: 1100T

Memory: G-Skill 8GB Kit (2x4)
Part No: F3-12800CL8D-8GBXM 1600MHz
Timings: 8-8-8-24
CPU used: 1100T


User: Praz

Memory: G-Skill RipJaws 8GB Kit (2x4)
Part No: F3-12800CL7D-8GBXH 1600MHz
Timings: 7-8-7-24
CPU used: 1090T

[Praz]

Post 1 of 2

Crosshair 5 Formula
AMD 1090T
2x4GB G.Skill Ripjaws 1600MHz/7-8-7-24, 1.60V (F3-12800CL7D-8GBXH)
OCZ RevoDrive 3 240GB
Asus GTX 580
OCZ ZX1250


click for larger image



click for larger image



click for larger image



click for larger image



click for larger image

[Praz]

Post 2 of 2


Prime 95 running using all memory
click for larger image



Prime 95 stopped
click for larger image



3DMark 06
click for larger image



3DMark Vantage
click for larger image



3DMark 11
click for larger image



PCMark Vantage
click for larger image



3ds Max 2011 w/VRay
click for larger image

[Praz]

Post 1 of 2

Crosshair 5 Formula
AMD 1090T
4x4GB G.Skill Ripjaws 1600MHz/7-8-7-24, 1.60V (F3-12800CL7D-8GBXH)
OCZ RevoDrive 3 240GB
Asus GTX 580
OCZ ZX1250


click for larger image



click for larger image



click for larger image



click for larger image



click for larger image

[Praz]

Post 2 of 2


Prime 95 running using all memory
click for larger image



Prime 95 stopped
click for larger image



3DMark 06
click for larger image



3DMark Vantage
click for larger image



3DMark 11
click for larger image



PCMark Vantage
click for larger image



3ds Max 2011 w/VRay
click for larger image

[Area 66]

Mine was workind fine with those one

G SKILL Ripjaws Series 16GB (4 x 4GB) (PC3 12800) F3-12800CL9Q-16GBRL

[Kipper]

Mine was workind fine with those one

G SKILL Ripjaws Series 16GB (4 x 4GB) (PC3 12800) F3-12800CL9Q-16GBRL

Hey Marked

What processor, timings, voltage so I can update the list.

Thanks

[Area 66]

it was a 1090t the timming was 9-9-9-24 I don't remeber the voltage since I have not this board anymore but as soon as Dozer is out I will get another one for sure.

[Jaytheredneck1]

8GB
Memory: G.Skill Sniper 8GB Kit (2x4gb) @1600MHz
Part No: F3-12800CL9D-8GBSR (Non-QVL)
Timings: 9-9-9-24
Volt: 1.5
CPU used: 1100T
Stable

16GB
Memory: 2x G.Skill Sniper 8GB Kit (2x4gb) @1600MHz
Part No: F3-12800CL9D-8GBSR (Non-QVL)
Timings: 9-9-9-24
Volt: 1.5
CPU used: 1100T
Read to Read: 4
Command: 1T
CPU/NB: 1.175
Stable at the moment

[EVIL_CONSERVATIVE]

WARNING ! These settings are on a system running CPU, GPU, Memory WATER COOLING Via Thermaltake Kandalf LCS Case ! I dont know if STOCK fans and heatsinks will be safe !!!

First my Components:
CHV -MB with Raja's 0053 Beta Bios
Win 7 64 bit Pro
1100T B.E.
Corsair Vengeance CMZ8GX3M2A1866C9 (1333 S.P.D.) (1866 rated) (1872 Current speed) 9-10-9-27 (Corsair Dominator CMP8GX3M2A1600C8 used to get o.s. to install) Had to install XP64 first.


CPU&CPU/NB MANUAL MODE
CPU-V -1.493750 ( will give overvolt warning in O.S. with ASUS software installed)
CPU/NB 1.481
CPU VDDA 2.775
Dram Voltage 1.65 (1.5 SPD worked but a little unstable) (1.65 I suggest good mem cooler)
VDDR 1.40450
NB Volt 1.515
NB HT 1.4
NB 1.8 1.908
VDD PCIE 1.5105
SBv 1.113 AUTO
DRAM REFRESH 7.8ms
Dram Command Rate 2T
ALL other settings AUTO
This Is giving me 3783Ghz, 1872 mem speed stable. @ 16 Gig
O.S. install was completed with the DOMINATOR memory at 8Gig. (now on EBAY hopefully can help someone else out who cant get the Vengeance to install O.S.)
I also had to install XP64Pro first once installed on an unmounted previously raided velociraptor repartitioned with basic format. Under 64 I zapped the SSD drive unlocking it and reformatted NFTS file sys.
I inserserted my O.E.M. Win7 64 Pro with WIN XP64 running and both the velociraptor set to IDE on Channel 1 and the SSD on ch5 with cdrom CH6..
as soon as it spun up IN WIN64 ??? WTF ??? I dont get it either, the auto installer started and asked if I wanted to install Win7 to OCZ xxx1234 SSD drive? I clicked yes and BOOM IT INSTALLED!
After resarting under SSD as boot drive with velociraptor diconnected it booted into 7 fine so I was able to reformat the Vel rap and re-mount it to the raid array as Drive d:
Get all that ? I'm still a little confused too. but it worked.